In addition to the standard Control Builder libraries, Experion PKS also supports special function block libraries that are licensed separately, such as the Profibus, Fieldbus, American Gas Association (AGA) Flow Rate Calculation, and Allen Bradley Drive Interface Libraries.
Libraries are licensed per control system. All function block libraries appear in the library tab of the Control Builder. This enables the user to see, use and learn all available function blocks on the project side of the Configurator. Only the standard and licensed function blocks can be loaded to a controller.
Due to its rich set of standard features, SCMs greatly simplify batch logic implementation. The SCM implementation follows the S88.01 standard. Standard features include abnormal handling, providing an alternative sequence execution for user specified abnormal conditions. Abnormal handlers support restart capabilities, re-starting the sequence from the position it was left or any other Step the process requires to continue. Standard Abnormal handlers include: Checking, Interrupt, Restart, Hold, Stop and Abort. Each sequence supports up to 50 recipe parameters. These include a range, material code and scale option. In addition, it has 50 history parameters for reporting the amount of actual dosed material and/or reached process conditions. The mode track option allows for different operating philosophies. Devices, such as motors, pumps, and controllers, will follow SCM mode changes allowing either operator or sequence device control. The devices can also be pre-configured with the action required after an SCM start, abnormal situation or restart. This reduces the SCM step configuration.
One feature of particular importance is the Common SCM function. A Common SCM is one that can control several equipment units, one at a time, depending upon the unit selected. It saves implementation, test and maintenance time required to support the application. The selected unit may be determined at configuration time or changed dynamically during run time. An example application might be header dosing in a batch plant. SCMs, including this Common SCM function, are fully integrated into Honeywell’s TotalPlant Batch package for flexible batch operation.
10001/R/1 Vertical Bus Driver
10005/1/1 Watchdog Module
10006/2/1 Diagnostic and battery module (DBM)
10018/E/1 FSC PlantScapeconnectionModule
10018/E/E FSC PlantScape connection Module
10020/1/2 CPU Module
10024/H/F Enhanced COMModule,CentralPart/RS232
10024/I/F Enhanced COM Module,RS485/RS232
10024/I/I 3400307Enhanced communicationmodule(ECM)
10100/2/1 Horizontal Bus Driver
10101/2/1 DI Module
10105/2/1 AI Module
10201/2/1 DO Module
10205/2/1 Fail-safe analog output module
10208/2/1 3400118 Relay output module
10300/1/1 Converter 24V to 5V
10302/2/1 Watchdog Repeater
10303/1/1 Power supply distributionmodule(PSD)
10313/1/1 5 Vdc + Watchdog distributionmodule
OTHER SUPERIOR PRODUCTS
|Yasakawa Motor, Driver SG-
||Mitsubishi Motor HC-,HA-
|Westinghouse Modules 1C-,5X-
||GE Modules IC -
|Fanuc motor A0-
||Yokogawa transmitter EJA-
Contact person: Anna