Industrial Omron SERVOMOTOR SGMP-08V314T 200V 4.1A 750W 3000R/MIN YASKAWA
Specifications
Manufacturer: Yaskawa
Product number: SGMP-08V314T
Vendor number: DMSGG13
Description: SGMP-08V314T is an Motors-AC Servo manufactured by Yaskawa
Servomotor Type: SGMP
Rated Output: 7500W (1.7HP)
Power Supply: 200V Standard Configuration
Encoder Specifications: 8192 P/R Incremental Encoder
Rated Speed: 1500 RPM (CE SPEC ONLY: 200V)
Shaft Specifications: Straight with key and one shaft-end tap
Options: Standard
YASKAWA ELECTRIC
SGMP-08V314T
SGMP-08V314T
DISCONTINUED BY MANUFACTURER
SERVO MOTOR 10.7AMP 8.34NM 1.3KW 1500RPM
REBUILT SURPLUS
NEVER USED SURPLUS
REPAIR YOURS
24-48 HOUR RUSH REPAIR
2 - 15 DAY REPAIR
2 YEAR RADWELL WARRANTY
Alternate Part Number:
YASKAWA ELECTRIC DMSGG13AB
SIMILAR PRODUCTS
SGMP-08V314T Motors Call For Stock
SGMP-13V314T Motors Call For Stock
SGMP-15A3G26BM Yaskawa SGMP-15A3G26BM: SERVO MOTOR 7.5AMP 1500W 200V Call For Stock
SGMP-15AW14B SERVO MOTOR Call For Stock
SGMP-15AW16DP Yaskawa SGMP-15AW16DP: SERVO MOTOR AC 1500W 200V 7.5AMP 1 In Stock
SGMP-15AWH16B Yaskawa SGMP-15AWH16B: DRIVE Call For Stock
SGMP-15AWHG12 Yaskawa SGMP-15AWHG12: SERVO MOTOR AC 1500W 200V 7.5AMP Call For Stock
SGMP-15AWYR11 Yaskawa SGMP-15AWYR11: SERVO MOTOR 1.5KW 200V 7.5AMP 4.77NM Call For Stock
SGMP-15AWYR12 Yaskawa SGMP-15AWYR12: SERVO MOTOR AC 3KRPM 1500W 200V 7.5AMP Call For Stock
SGMP-15U314CM SGMP MOTOR 200V 15KW INCREMENTAL W/BRAKE 24V Call For Stock
SGMP-15U314M Yaskawa SGMP-15U314M: SERVO MOTOR 1.5KW 200V 7.5A 4.77NM Call For Stock
SGMP-15U314P Yaskawa SGMP-15U314P: SERVO MOTOR 4.7NM 3000RPM 1500W 200V 7.5AMP Call For Stock
SGMP-15UW14CM SGMP MOTOR 200V 15KW ABSOLUTE W/BRAKE 24V Call For Stock
SGMP-15UW14M SGMP MOTOR 200V 15KW ABSOLUTE Call For Stock
SGMP-15V314T Yaskawa SGMP-15V314T: SERVO MOTOR AC 7.5AMP 3000RPM Call For Stock
Always follow the specified installation method.The Servopack generates heat. Install the Servo-pack so that it can radiate heat freely. Note alsothat the Servopack must be in an environmentfree from condensation, vibration and shock.Perform noise reduction and grounding properly.If the signal line is noisy, vibration or malfunctionwill result.D Separate high-voltage cables from low-voltage cables.D
Use cables as short as possible.D Use at least class 3 grounding (ground resistance100Ω or below) for the Servomotor and Servopack.D Never use a line filter for the power supply in themotor circuit.
Conduct a voltage resistance test under the following conditions.D Voltage: 1,500 Vrms AC, one minuteD Braking current: 20 mAD Frequency: 50/60 HzD Voltage applied point: Between R, T terminals andframe ground (connect terminals R and T securely.)Use a fast-response type ground-fault interrupter.For a ground-fault interrupter, always use a fast-response type or one designed for PWM invert-ers.
Do not use a time-delay type.Do not perform continuous operation under overhanging load.Continuous operation cannot be performed by ro-tating the motor from the load and applying regen-erative braking. Regenerative braking by the Ser-vopack can be applied only for a short period,such as the motor deceleration time.
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- |
Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- |
Emerson VE-,KJ- |
| Honeywell TC-,TK- |
GE Modules IC - |
| Fanuc motor A0- |
Yokogawa transmitter EJA- |
Contact person: Anna
E-mail: wisdomlongkeji@163.com
Cellphone: +0086-13534205279