|
|
|
Product Details:
Payment & Shipping Terms:
|
| Brand: | Fanuc | Part Number: | A06B-6093-H172 |
|---|---|---|---|
| Country Of Original: | Japan | Rated Input: | 50HZ/60HZ |
| Output Votage: | 240V | Type: | Industrial Servo Drives |
| RATED OUTPUT CURRENT: | 5.9A | ||
| High Light: | electric servo drive,ac servo pack |
||
50HZ/60HZ 240V BETA SERVO DRIVE MDL SVU-20, I/O LINK Industrial Servo Drives A06B-6093-H172
Description:
Rated Input 50HZ/60HZ
Output Votage 240V
RATED OUTPUT CURRENT 5.9A
Part Number: A06B-6093-H172
Description: BETA SERVO DRIVE MDL SVU-20, I/O LINK
Product Series: A06B-6093
Quick detail
| Brand | Fanuc |
| Country of original | Japan |
| Part number | A06B-6093-H172 |
| Type | Industrial Servo Drives |
SPECIFICATION
|
EUA Stock No20424 |
Brand/ManufacturerFanuc |
Manufacturer Part NumberA06B-6093-H172 |
|
Product typeServo Drive |
Supply voltage240 V |
Current rating10.1 A |
|
Voltage rating240 V ac |
1. Make NC PRM 960.3 (PMN) = 0 (Enables PMM function).
2. Select where parameters are to be saved (to save to memory card on i series controls make PRM 960.2 (MD2) = 0 and PRM 960.1 (MD1) = 1, to save as a part program make PRM 960.1 = 0).
3. Set parameter 8760 to the program number you want the parameters to be stored as. Note 1.
4. Press the SYSTEM button then the RIGHT CHAPTER button until the Power Motion Manager screen is displayed.
5. Press the SYSTEM soft key.
6. Press the PARAM soft key.
7. Press the OPRT soft key.
8. Press the RIGHT CHAPTER button. READ and PUNCH soft keys will be displayed.
9. Select EDIT mode.
10. To save parameters from Beta drive to CNC press the READ soft key, press the ALL soft key then the EXEC soft key.
11. To restore the parameters from the CNC to the Beta drive press the PUNCH soft key, press the ALL soft key then the EXEC soft key.
Parameter 960.0 (SLV) determines how many slaves are displayed on the screen when the Power Motion Manager is selected.
0 = One slave.
1 = Up to four slaves with the screen divided into four.
Parameters 960.1 (MD1) and 960.2 (MD2) set the slave parameter input/output destination.
MD1 = 0, MD2 = 0, destination is the part program storage.
MD1 = 1, MD2 = 0, destination is the memory card.
Parameter 960.3 (PMN) sets the status of the power motion manager function.
0 = Enabled
1 = Disabled (Communication with slaves is not performed).
Note 1: The program under which the parameters will be stored is derived by multiplying the number of the Fanuc Beta Drive I/O link group by 10 and adding the result to the value in parameter 8760. So if the group number is 2 and the value of parameter 8760 is 9000, then 9000 + (2 x 10) = 9020, the parameters will be stored in program O9020
Our advantage Products:
【Honeywell】Module DCS / PLC
【Emerson】DeltaV Module / Servo Motor
【ABB】Input Output Module
【AB】Module / Touch Screen
【Rosemount】Pressure and Temperature Transmitter
【Yokogawa】Pressure Transmitter
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive
(Modicon,SMC,SICK,NORGREN,Siemens etc.)
Shenzhen Wisdomlong Technology CO.,LTD
Contact person:Suki
Email:wtl2502keji@163.com
Skype:wtl2502
Company website:www.wtltian.com
Tel:+86-13268302140
Contact Person: Suki
Tel: 86-13268302140