Industrial 1PCS New Yaskawa Servo Drive Output 2.84AMPS SGDS-04A12A NEW IN BOX

 

Set Media Sensors The ^SS (Set Media Sensors) instruction is used to change the sensor values for media, web, ribbon and label length that were set during the “media calibration” process. (consult the “Media Calibration” process as described in your printer user’s guide.)

 

 

Mode Protection The ^MP (Mode Protection) instruction is used to disable the various Mode functions on the front panel. Once disabled, the settings for the particular mode function can no longer be changed and the LED associated with the function will not light. Since this instruction has only one parameter, each mode will have to be disabled with an individual ^MP instruction

 

 

 

Reprint After Error The ^JZ (Reprint After Error) instruction is used to reprint a partially printed label caused by a Ribbon Out, Media Out or Head Open error condition. The label will be reprinted as soon as the error condition is corrected. This instruction will remain active until another ^JZ instruction is sent to the printer or the printer is turned off. The ^JZ instruction sets the error mode for the printer. (If ^JZ is changed, only labels after the change will be affected.)

 

 

Configuration Update The ^JU (Configuration Update) instruction sets the active configuration for the printer. There are three choices for this instruction. They are defined as follows: S = Save Current Settings The current configuration will be saved. This is the configuration that will be used at Power-On. F = Reload Factory Values (Default) The factory values (default values) will be loaded. (These values will be lost at Power Off if they are not saved with the ^JUS instruction.) R = Recall Last Saved Values The last values saved using this (^JU) instruction or the Mode Sequencing from the front panel will be loaded.

Yaskawa