|
|
|
Product Details:
Payment & Shipping Terms:
|
| Manufacturer: | Siemens | Item: | 6ES7505-0RB00-0AB0 |
|---|---|---|---|
| Short-circuit Protection: | Yes | Infeed Power To The Backplane Bus: | 60 W |
| Status Indicator: | Yes | Weight, Approx.: | 865 G |
| Dimensions: | 105*147*129 Mm | Shipping Terms: | UPS/DHL/FEDEX/TNT |
| Payment Terms: | Western Union/Paypal/TT | Condition: | 100% New |
| High Light: | 6ES7505-0RB00-0AB0,Siemens S7-1500 |
||
Power supplies (PS) supply the internal electronics of the S7-1500 modules with power via the backplane bus. They are required, for example, if the power supplied by the CPU or the interface modules to the backplane bus is not sufficient to supply all connected modules, or if more than one power segment in the S7-1500 configuration or in distributed configuration in ET 200MP should be implemented.
In addition, the PS 60W 24/48/60V DC HF allows all S7-1500 CPUs to retentively store their entire work memory (data) thanks to an appropriate power buffer.
| General information | ||
| Product type designation | PS 60 W 24/48/60 V DC HF | |
| HW functional status | E01 | |
| Firmware version | V1.0.0 | |
| Engineering with | ||
| ● STEP 7 TIA Portal configurable/integrated from version | V14 SP1 | |
| Supply voltage | ||
| Rated value (DC) | 24 V / 48 V / 60 V | |
| permissible range, lower limit (DC) | Static 19.2 V, dynamic 18.5 V | |
| permissible range, upper limit (DC) | Static 72 V, dynamic 75.5 V | |
| Reverse polarity protection | Yes | |
| Short-circuit protection | Yes | |
| Mains buffering | ||
| ● Mains/voltage failure stored energy time | 20 ms | |
| Input current | ||
| Rated value at 24 V DC | 3 A | |
| Rated value at 48 V DC | 1.5 A | |
| Rated value at 60 V DC | 1.2 A | |
| Inrush current, max. | ≤ 8 A for t ≤ 1 s | |
| Output current | ||
| Short-circuit protection | Yes | |
| Power | ||
| Infeed power to the backplane bus | 60 W | |
| Power loss | ||
| Power loss at nominal rating conditions | 12 W | |
| Interrupts/diagnostics/status information | ||
| Status indicator | Yes | |
| Isolation | ||
| Isolation tested with | 2 500 V DC (type test) | |
| Degree and class of protection | ||
| Equipment protection class | I, with protective conductor | |
| Dimensions | ||
| Width | 105 mm | |
| Height | 147 mm | |
| Depth | 129 mm | |
| Weights | ||
| Weight, approx. | 865 g | |
Design
Power supplies are screwed directly to the S7-1500 mounting rail and are connected with the upstream or downstream module via a U connector. PS 60W 24/48/60V DC HF can only be connected next to the CPU/IM on the left-hand side.
The front of the power supply contains:
Diagnostics LEDs to indicate status and errors:
Error (Error), operation (RUN), maintenance (MAINT)
The power supplies also come with the following:
On-off switch
Power supply terminals
System power supplies:
| 6ES7505-0KA00-0AB0 |
| 6ES7505-0RA00-0AB0 |
| 6ES7505-0RB00-0AB0 |
| 6ES7507-0RA00-0AB0 |
Overview
System power supplies for SIMATIC S7-1500
For conversion of AC or DC line voltages to the operating voltages required for the internal electronics
25 or 60 W output power
Can be used for S7-1500 or ET 200MP
Engineering and configuration via STEP 7 V12 and higher (PS 60W 24/48/60V DC HF: from STEP 7 V14 SP1)
In addition with PS 60W 24/48/60V DC HF: Retentive storage of CPU work memory (data) for all S7-1500 CPUs
Function
Properties:
Rated input voltage dependent on the type of module
Output power dependent on the type of module
Mains buffering
Galvanic isolation from the bus
The following functions are supported by the power supply modules:
Firmware update
Identification and maintenance data I&M0 to I&M3
Reconfiguration in RUN
Diagnostics alarms
Diagnostic interrupts
In addition, the PS 60W 24/48/60V DC HF enables all S7-1500 CPUs to retentively store their entire work memory (data).
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.
Contact Person: Mayne
Tel: +86 14787509512