|
|
|
Product Details:
Payment & Shipping Terms:
|
| Brand: | GE Fanuc | Model: | IC660BBD023 |
|---|---|---|---|
| Series: | Genius I-O | Description: | Serial I/O Block |
| Voltage: | 24 Volts DC | Circuits: | 16 |
| Load Current Rating: | 2 Amperes | Selectable Input Filter Time: | 10-100 Ms |
| Heat Dissipation: | 68.8 Watts With 2 Amperes | Warranty: | 1 Year |
| High Light: | ESCPP Positive Logic Output Module,24VDC Positive Logic Output Module,RS485 Digital I O Module |
||
The IC660BBD023 is a 24 VDC Source I/O, 16 Circuit, 2/3 Wire Sensor Compatible Block of GE Fanuc series 90-30 PLCs. It is one of the discrete and analog blocks in this series. Its interface is electromechanical and has two or three wire solid state sensors. The block has 16 discrete circuits that can work as inputs, tristate inputs, or outputs. This block receives current from field output devices. The power source needed is 24/48 VDC.
The IC660BBD023 has 16 circuits and many features. These include output pulse test, configurable input filter time, output power up defaults, and output hold last state or default. It also has diagnostics for installation and run-time errors.
Dimensions for IC660BBD023 are 22.4c.m. x 9.05cm x 11.23c.m. The block weighs 1.8kg. Its operating temperatures are from 0 to 60 degrees Celsius. A handheld monitor and CPU rev 110 or later is required for proper configurations. This block is compatible with all types of handheld
monitors.
The IC660BBD023 can replace all its previous versions when a compatible electronics assembly is. When installing, a protective case should be used in conjunction with an appropriate environment, meaning no airborne contaminants and adequate cooling and air flow. A reliable grounding system is also required. The desired cables when wiring the terminals are #12 or two #14 wires.
| Rated Voltage: | 24 VDC |
| # of Points: | 16 |
| Input Range: | 18-30 VDC |
| Load Current: | 2 Amp |
| Operating Voltage: | 18-30 VDC |
| Points per Common: | One group of 16 |
|
Block Type: CatalogNumbers: 24 / 48VDC16CircuitSourceI / OBlock Terminal Assemblyonly ElectronicsAssemblyonly 24VDC Source 16 Circuit Source I / O Block Terminal Assemblyonly ElectronicsAssemblyonly 24 / 48VDC16CircuitSinkI / OBlock Terminal Assemblyonly ElectronicsAssemblyonly 24VDC 16 Circuit Sink I / OBlock Terminal Assemblyonly ElectronicsAssemblyonly |
16 circuit discrete input and output |
| IC660BBD020 | |
| IC660TSD020 | |
| IC660EBD020 (same as block IC660BBD022) | |
| IC660BBD022 | |
| IC660TBD022 | |
| IC660EBD020 (same as block IC660BBS020) | |
| IC660BBD021 | |
| IC660TSD021 | |
| IC660EBD021 (same as block IC660BBD023) | |
| IC660BBD023 | |
| IC660TBD023 | |
| IC660EBD021 (same as block IC660BBD021) | |
| Size (height x width x depth): | 8.83” (22.44cm) x 3.50” (8.89cm) x 3.94” (10.00cm) |
| Weight: | 4 lbs. (1.8 kg) |
| LEDS (block): | Unit OK, I / OEnabled |
| LEDs (each circuit): | Individual load side indicators |
| HeatDissipation: | 68.8 Watts with 16 outputs on at 2 amps. |
| Block to Block Isolation: | 1500 V |
| Operatingvoltage: | 18–56 VDC (24 / 48 V), 18–30 VDC (24 V) |
| Ripple (maximum): | 10% |
| Required DC power: | 150mAtypical / 300mAmaximum |
| Power supply dropout time: | 10mS |
|
Input Characteristics: For standard input, voltage relative to (DC–) Input ON, 24 VDC supply 48 VDC supply* Input OFF, 24 VDC supply 48 VDC supply* Input processing time (typical) Input impedance (typical) Selectable input filter times Inputdiagnostics |
Source Blocks Sink Blocks |
| 16–24 VDC 0–8 VDC | |
| 32–48 VDC * 0–16 VDC* | |
| 0–7 VDC 17–24 VDC | |
| 0–14 VDC* 34–48 VDC* | |
| 5.6Kohms (24 / 48V), 1.8Kohms (24V) | |
| 1.7mS (plus selectable filter delay) | |
| 5–100mS | |
| Open wire, Overtemperature, Failed Switch | |
|
OutputCharacteristics: Output current (steady state) |
2 amps per circuit |
| Maximum inrush current | 10 amps up to 10mS |
| Block output current | 15 amps at 35C |
| Output OFF leakage current | 1.0 mA |
| Maximumswitching frequency | Once per second (high inrush current) |
| Output turn–on delay (maximum) | 1mS |
| Output voltage drop | 2.0 volts maximum at 2 amps inrush |
| Minimum Recommended Load | 50 mA with No Load nabled |
| Output Diagnostics | Short Circuit, Overload, No Load, Failed Switch, Overtemperature |
|
Environmental: Operating temperature |
0 to +60C (32 to +140F) |
| Storage temperature | –40 to +100C (–40 to +212F) |
| Humidity | 5 to 95% (non–condensing) |
| Vibration | 5–10Hz 0.2” (5.08mm) displacement, 10–200Hz at 1G |
Contact Person: Mayne
Tel: +86 14787509512