Yaskawa SGMPH-02A1A21 Industrial Servo Motor Brand New Original

Yaskawa SGMPH-02A1A21 Industrial Servo Motor Brand New In Original Box
Description:
SGMPH-02A1A21 is a Motors-AC Servo produced by Yaskawa
Servomotor Type: SGMPH Sigma II
Rated Output: 200W (0.25HP)
Power Supply: 200V
Encoder Specifications: 16-bit (16384 x 4) Absolute Encoder
Design: Revision Order A

More info to help you know this product:
Large capacity SGMPH type servo motor.
Rated output: 22KW.
Voltage: three phase AC400V.
Serial encoder: 20 bit delta.
Rated speed: 1500r/min.
The main mechanical structure: support mounting type, straight shaft (with keyway and screw).
Optional parts: with hold brake (DC24V), with oil seal.
The use of small, low inertia servo motor, also can give full play to the strength of the mechanical properties SGMPH-01A1A21 SGMPH-01A1A21
The new model SGMVV with a rated output of 22~55KW, the amount of passenger speed 800r/min and 1500r/min products.
After the motor is installed, the phase is started to run immediately.
Even if the servo is not adjusted, as long as the moment of inertia is within the allowable range,
Even if the load changes, it can be driven stably, and the vibration will not happenSigma -V series servo motor SGMGV SGMPH-01A1A21.
Rated output: 2.9kw.
Power supply voltage: AC400V.
Serial encoder: 20 bit absolute value type (standard).
Design sequence: standard.
Shaft end: straight shaft with keyway, with screw (optional).
Optional: with oil seal.
A variety of mechanical feed shaft drive (high speed feed).
Variety is complete (300W ~ 15kW, with hold brake) SGMPH-01A1A21.
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67.
Use example: Machine tool,Transport machinery,Handling machinery,Food processing machinery.
Product's image:


Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: F.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotationSigma -v series servo unit SGDV.
Maximum applicable motor capacity: 1.5kw.
Power supply voltage: three phase AC200V.
Design sequence: A type.
Interface: MECHATROLINK- II communication command type (linear servo motor).
Matching (hardware): paint.
Realize real time communication.
The maximum transmission speed of 10Mbps and can be set to the communication cycle 250 s ~ 4ms,
Achieved a maximum of 30 stations in the high speed control. Through the high speed of communication,
Can send and receive all kinds of control information in real time.
Energy saving and high efficiency.
A maximum of 30 stations can be connected to the communication lines, can significantly reduce the wiring costs and time.
The command connector of the upper controller only needds 1,
Pulse generator for D/A converter or position instruction without speed / torque command SGMPH-01A1A21.
High precision motion control is realized.
In addition to torque, position and speed control, but also to achieve high precision synchronizzation phase control SGMPH-01A1A21.
Because the control mode can be switched on line, the complicated mechanical action can be realized more effectively and smoothly.
About Our Company:
Our company locates at the central of China,Luohu Area Shenzhen, Guangdong Province.
Mainly engaged in automation parts, PLCS,DCS,sensors, relays, dirves,encoder, servo drive,soft starter,touch screen,instrument,process control,electric transmission and factory automation aspects of the project design,software programming,technical service and staff training.
The company with domestic and international numerous well-known brands supplier to build have extremely good relations of cooperation, in Japan, South Korea, southeast Asia, Africa, Europe and the United States, and formed a stable and efficient supply network. The agent and the products are widely used in machinery, equipment manufacturing, electric power, metallurgy, petrochemical, automobile manufacturing industry, paper making, chemical industry, medicine and aerospace industries.
Brief Introduction about our company:

Payment&Delivery Info:
Payment Terms:
1. Our company Accepts T/T and Paypal and other payment methods
Quality:
1. All items are subject to availability
Turnaround Time:
1. Standard order processing is 1-2 business days plus shipping method chosen.
Rush and off-hours service available for an additional fee.
Packaging and Handling:
Items are safely packaged in custom shipping cartons for protection.
Shipping:
(1). We ship worldwide by UPS, FedEx, DHL, or Truck when needed.
(2). Call to use a shipping service other than the ones listed.
Note: International Customers are responsible for all Customs fees, VAT, and other fees applied by their respective countries
After-sales Service and Warranty you need to know:
1. Why choose us?
* Passionate, experienced and highly-educated R & D and sales team;
* Reasonable price and reliable products, skillful and careful assembly;
* Strict quality assurance and quick aftersales service;
* Lifetime technical support, can come with customized setting.
2. How about your product warranty?
* We offer one-year warranty upon delivery.
3. How about the aftersales support?
* We will offer on-time response for online enquiries from oversea users. Please feel free contact us by email, WhatsApp, WeChat and SKYPE.
More info help you to know our company's products:
 

Our brands of Wisdomlong Technology CO.,LTD

OTHER SUPERIOR PRODUCTS of Wisdomlong Technology CO.,LTD