IC693CHS391 GE FANUC SERIES 90-30 PLC Digital I/O Module FACTORY SEALED

IC693CHS391 GE FANUC SERIES 90-30 PLC Digital I/O Module  FACTORY SEALED
 
IC693CHS391 Product Description:
 
GE Fanuc Discrete input module for 90 - 30 series PLC offers 16 input points with one common power input terminal. It requires an AC power source for convenient operation. Module has LED indicators at the top to offer ON/OFF status of each point. Module has circuit wiring information on the surface towards the inside and circuit identification information on the outside surface. Module has a voltage rating of 120 VAC at 50/60 Hz, 0 - 132 VAC at 50/60 Hz, input current rating of 12 milli-Amps and a power rating of 90 milli-Amps at 5 VDC. It has a maximum ON response time of 30 milli-seconds and maximum OFF response time of 45 milli-seconds. Module is compatible with input devices such as pushbuttons, limit switches and electronic proximity switches. Input/output module provides the interface between the PLC and external input devices such as proximity sensors, push buttons, switches and BCD thumbwheels. It supports different voltage ranges, types, current capacity, isolation and response time to meet your application.
  
IC693CHS391 Product Details:

Input modules provide the interface between the PLC and external input devices such as proximity sensors, push buttons, switches and BCD thumbwheels. Output modules provide the interface between the PLC and external output devices such as contactors, interposing relays, BCD displays and indicator lamps. This module requires an AC power source, it cannot be used with a DC power source.
 

IC693CHS391 Product Summary:

• Internal Power Supply: 20 Milli-Amp at 5 Volt DC
• Number of Slots Module Occupies on Backplane: 10 Slots
• Description: Base 10-Slot | IC693CHS391
• Size: 17.440 Inch Width x 5.590 Inch Depth x 5.120 Inch Height
• Product Description: GE Fanuc Modular CPU baseplate for 90 - 30 series PLC has 10 slots where left slot for power supply module, slot 1 for CPU module/FIP remote I/O scanner, slot 2 and above supports I/O or option modules. It has a 25-pin D-type female expansion connector at the right end for connecting to an expansion or remote baseplate. Baseplate can be connected to a system that has a CPU. It measures 17.440 Inch x 5.590 Inch x 5.120 Inch. It offers standard length cables for easy installation and provides wiring information for custom applications. Modular CPU can be replaced or changed to a different type if additional features are required.

• Type of Device: CPU Baseplate; 420 Milli-Amp at 5 Volt DC

• Internal Power Supply: 20 Milli-Amp at 5 Volt DC

• Number of Slots Module Occupies on Backplane: 10 Slots

• Product Details: Series 90-30 baseplates are available in 5 and 10 slot configurations to the meet the needs of your application. You can choose expansion or remote baseplates for multi-rack systems, covering distances of up to 700 ft from the CPU

 
 
IC693CHS391 Related Product Recommendation:

 
 

 
 
 
The use of the product:

Our advantage Products:
【Honeywell】Module DCS / PLC
【Emerson】DeltaV Module / Servo Motor
【ABB】Input Output Module
【AB】Module / Touch Screen
【Rosemount】Pressure and Temperature Transmitter
【Yokogawa】Pressure Transmitter
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive
(Modicon,SMC,SICK,NORGREN,Siemens etc.)