GE FANUC SERIES 90-30 PLC Digital I/O Module IC693MDR390 FACTORY SEALED

 GE FANUC SERIES 90-30 PLC Digital I/O Module IC693MDR390 FACTORY SEALED
 
 
 
 
Product Description:

GE Fanuc Discrete input module for 90 - 30 series PLC offers 16 input points with one common power input terminal. It requires an AC power source for convenient operation. Module has LED indicators at the top to offer ON/OFF status of each point. Module has circuit wiring information on the surface towards the inside and circuit identification information on the outside surface. Module has a voltage rating of 120 VAC at 50/60 Hz, 0 - 132 VAC at 50/60 Hz, input current rating of 12 milli-Amps and a power rating of 90 milli-Amps at 5 VDC. It has a maximum ON response time of 30 milli-seconds and maximum OFF response time of 45 milli-seconds. Module is compatible with input devices such as pushbuttons, limit switches and electronic proximity switches. Input/output module provides the interface between the PLC and external input devices such as proximity sensors, push buttons, switches and BCD thumbwheels. It supports different voltage ranges, types, current capacity, isolation and response time to meet your application.
 
 
 
 
Product Details:
 
Input modules provide the interface between the PLC and external input devices such as proximity sensors, push buttons, switches and BCD thumbwheels. Output modules provide the interface between the PLC and external output devices such as contactors, interposing relays, BCD displays and indicator lamps. This module requires an AC power source, it cannot be used with a DC power source.
 
 
 
 

Product Summary:

• Color: Blue/Red

• Connection: 20 Screw Terminal Block

• Load Current: 2 Amp Per Point

• Number of Points / Point per Common: 8

• Response Time: 1 ms On/Off

• Description: I/O Module

• Output Range: 0 - 125 Volt DC, 5/24/125 Volt DC Nominal; 0 - 265 Volt AC, 120/240 Volt AC Nominal

• Response Time: 1 ms On/Off

• Features: Input modules provide the interface between the PLC and external input devices such as proximity sensors, push buttons, switches and BCD thumbwheels. Output modules provide the interface between the PLC and external output devices such as contactors, interposing relays, BCD displays and indicator lamps. GE offers a variety of modules that supportdifferent voltage ranges and types, current capacity, isolation and response time tomeet your application needs.

• Product Description: GE Fanuc Discrete output module for 90 - 30 series PLC offers 8 input points with one common power input terminal and 8 normally open relay circuits. Input circuits have either positive/negative characteristics and offers sink/source current to/from the input devices. Each circuit has an output switching capacity of 2 Amps. It is compatible with a wide range of devices such as pushbuttons, limit switches and electronic proximity switches. Normally-open relay circuits are ideally designed to control output loads. Relay outputs control a wide range of load devices such as motor starters, solenoids and indicators. The 24-VDC bus on the backplane provides power for the internal relay circuits. It has LED indicators at the top to offer ON/OFF status of each point. Module has circuit wiring information on the surface towards the inside and circuit identification information on the outside surface. The top half of the insert is blue color to indicate low-voltage circuits and the bottom half is red colored to indicate high-voltage circuits. Module can be conveniently installed in any I/O slot of a 5 or 10-slot baseplate in a 90 - 30 series PLC system. It has a voltage rating of 30 - 32 VDC, current rating of 7.5 milli-Amps and a power rating of 80 milli-Amps at 5 VDC/70 milli-Amps at 24 VDC. Module has a maximum ON response time of 15 milli-seconds and maximum OFF response time of 15 milli-seconds. Input/output module provides the interface between the PLC and external input devices such as proximity sensors, push buttons, switches and BCD thumbwheels. It supports different voltage ranges, types, current capacity, isolation and response time to meet your application.

• Type of Device: 24 Volt DC Input, Relay Output, 8 Inputs/8 Outputs

• Color: Blue/Red

• Connection: 20 Screw Terminal Block

• Internal Power Supply: 80 Milli-Amp at 5 Volt DC; 70 Milli-Amp at 24 Volt DC Relay

• Load Current: 2 Amp Per Point

• Number of Points / Point per Common: 8

Terms

We ships worldwide and accepts T/T and Paypal.

All items are subject to availability and passing our QA testing and inspection.

Payment
Credit card on line is available.We also accept payment by P a y p a l,T/T and Western Union.
This item have stock,so can delivery to you within 3 business days after your payment cleared.If ther
is any import duties or taxes,it is the buyer's responsibility.