Industrial Servo Motor Yaskawa Servo Motor SGMGV-13ADA6C 1.3KW 1500r/min
Specifications
Manufacturer: Yaskawa
Product number: SGMGV-13ADA6C
Description: SGMGV-13ADA6C is an Motors-AC Servo manufactured by Yaskawa
Servomotor Type: SGMGV Sigma V High-torque type
Rated Output: 1.3kW
Power Supply Voltage: 200VAC
Serial Encoder: 20-bit Incremental
Design Revision Order: Standard
Shaft End: Straight with key and tap
Options: With 24VDC holding brake
Control: Standard
Manufacturer
Yaskawa Drives & Motion Division
Description
Sigma-5 Servo Motors, SGMGV, 200V, rated output = 1.3 kW, with 24VDC Brake
Part Number
SGMGV-13ADA6C
Features
1Super high power rate (Extremely low inertia)
1Instantaneous peak torque (300% of rated torque)
1Mounted high-resolution serial encoder:
20 bits
1Maximum speed: 6,000 min-1
1Wide selection: 50 W to 1.0 kW capacity, holding
brake and gear options
Application Examples:
1. Semiconductor equipment.
2. Chip mounters
3. PCB drilling stations
4. Robots
5. Material handing machines
6. Food processing equipment
SIMILAR PRODUCTS
SGMGV-03A3A61
SGMGV-03A3A6C
SGMGV-03A3A6E
SGMGV-03A3A6S
SGMGV-05A3A61
SGMGV-05A3A6C
SGMGV-05A3A6E
SGMGV-05A3A6S
SGMGV-09A3A61
SGMGV-09A3A6C
SGMGV-09A3A6E
SGMGV-09A3A6S
SGMGV-13A3A61
SGMGV-13A3A6C
SGMGV-13A3A6E
SGMGV-13A3A6S
SGMGV-20A3A61
SGMGV-20A3A6C
SGMGV-20A3A6E
SGMGV-20A3A6S
SGMGV-30A3A61
SGMGV-30A3A6C
SGMGV-30A3A6E
SGMGV-30A3A6S
SGMGV-44A3A61
SGMGV-44A3A6C
SGMGV-44A3A6E
SGMGV-44A3A6S
SGMGV-55A3A61
SGMGV-55A3A6C
SGMGV-55A3A6E
SGMGV-55A3A6S
SGMGV-75A3A61
SGMGV-75A3A6C
SGMGV-75A3A6E
SGMGV-75A3A6S
SGMGV-1AA3A61
1Load Moment of Inertia
The larger the load moment of inertia, the worse the movement response of the load.
The allowable load moment of inertia (JL) depends on the motor capacity, as shown above. This value is provided
strictly as a guideline and results may vary depending on servomotor drive conditions.
Use the AC servo drive capacity selection program SigmaJunmaSize+ to check the operation conditions.
The program can be downloaded for free from our web site (http://www.e-mechatronics.com/).
An overvoltage alarm (A.400) is likely to occur during deceleration if the load moment of inertia exceeds the
allowable load moment of inertia. SERVOPACKs with a built-in regenerative resistor may generate a regenerative
overload alarm (A.320). Take one of the following steps if this occurs.
x Reduce the torque limit.
x Reduce the deceleration rate.
x Reduce the maximum speed.
x Install an external regenerative resistor if the alarm cannot be cleared using the steps above. Refer to
Regenerative Resistors on page 351.
Servomotor Main Circuit Cables
Customers must assemble the servomotor’s main circuit cables and attach connectors to connect the
SERVOPACKs and the SGMGV servomotors.
The connectors specifi ed by Yaskawa are required. Note that the connectors vary depending on the operation
environment of servomotors.
Two types of connectors are available.
x Standard connectors
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- |
Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- |
Emerson VE-,KJ- |
| Honeywell TC-,TK- |
GE Modules IC - |
| Fanuc motor A0- |
Yokogawa transmitter EJA- |
Contact person: Anna
E-mail: wisdomlongkeji@163.com
Cellphone: +0086-13534205279
x Protective structure IP67 and European Safety Standards compliant connectors
Yaskawa does not specify which cables to use. Use appropriate cables for the connectors.