Three-phase 60HZ 0.4KW-2KW HC-MFS13BG1(1/12) Servo Motor Mitsubishi
HC-MFS13BG1(1/12) Description
The HC-MFS13BG1 (1/12) is a 100W (0.1 kW) ultra-low inertia AC servo motor from Mitsubishi Electric’s MELSERVO HC series, integrated with a 1/12 ratio general industrial gear reducer. Designed for high-frequency, high-precision positioning tasks, it features an electromagnetic brake and 17-bit high-resolution absolute feedback for accurate position control. Paired with MELSERVO J2S series drivers, it delivers fast dynamic response, stable torque output, and reliable operation in compact automation setups. Ideal for space-constrained machinery requiring precise motion control.
HC-MFS13BG1(1/12) Key Features
- Ultra-Low Inertia Design: Minimizes mechanical resonance, enabling high-speed acceleration/deceleration (0–4500 RPM) and high-frequency operation for improved cycle efficiency.
- Integrated 1/12 Gear Reducer: Boosts output torque while reducing output speed, ideal for applications requiring higher torque at lower RPM without additional gearing.
- 17-Bit Absolute Encoder: Provides 131,072 pulses/revolution resolution for precise position feedback, eliminating homing routines and ensuring repeatable positioning.
- On-Board Electromagnetic Brake: Delivers rapid, reliable stopping for safety and positional holding, critical for vertical-axis or emergency-stop applications.
- High Torque Density: Rated torque of 0.32 Nm with peak torque up to 0.95 Nm (300% overload), handling sudden load changes and dynamic 工况.
- 200V Class Power Supply: 0.85 A rated current, 2.6 A peak current, compatible with standard MELSERVO J2S drivers for seamless integration.
- IP55 Protection: Dust-tight and water-resistant, suitable for harsh industrial environments (excluding shaft and connector).
- Compact Form Factor: 60×60 mm flange, 121.5 mm length, lightweight design for easy integration into small machinery.
- Robust Environmental Rating: Operates in 0–40°C ambient temperature, withstanding vibration (49 m/s²) and humidity up to 80% RH (non-condensing).
HC-MFS13BG1(1/12) Materials & Applications
Materials
- Housing: Die-cast aluminum alloy with corrosion-resistant finish, ensuring durability and heat dissipation.
- Gear Reducer: High-precision hardened steel gears with industrial-grade lubricant for long service life and low backlash.
- Rotor & Stator: Neodymium permanent magnet rotor and high-grade silicon steel stator for high torque density and efficiency.
- Encoder: Industrial-grade absolute encoder with precision bearings, ensuring reliable signal transmission.
- Shaft: Hardened chrome-alloy steel straight shaft (D-cut optional) for high rigidity and load resistance.
Typical Applications
- Small-Scale Robotics: Pick-and-place units, small articulated robots, and precision assembly stations.
- Semiconductor & Electronics: Chip mounters, wire bonders, and PCB handling equipment.
- Packaging Machinery: High-speed labeling, filling, and cartoning systems.
- Medical Equipment: Diagnostic analyzers, automated sample handling, and precision motion stages.
- General Automation: X-Y tables, linear slides, and small conveyor systems.
- Textile & Printing: Small winding machines and precision registration controls.
HC-MFS13BG1(1/12) Important Parameters
| Parameter |
Specification |
| Part Number |
HC-MFS13BG1 (1/12) |
| Product Type |
AC Servo Motor with Integrated Gear Reducer |
| Series |
MELSERVO HC (MELSERVO J2S Driver Compatible) |
| Rated Output Power |
100 W (0.1 kW) |
| Gear Ratio |
1/12 |
| Rated Speed |
3000 RPM |
| Maximum Speed |
4500 RPM |
| Rated Torque |
0.32 Nm |
| Peak Torque |
0.95 Nm |
| Rated Current |
0.85 A |
| Peak Current |
2.6 A |
| Encoder Resolution |
17-bit (131,072 ppr, absolute) |
| Brake Type |
Electromagnetic |
| Shaft Type |
Straight (D-cut optional) |
| Supply Voltage |
200 V AC class |
| Insulation Class |
B |
| Protection Rating |
IP55 (body only; shaft/connector exposed) |
| Mounting Flange |
60 × 60 mm |
| Overall Dimensions (W×H×L) |
42 × 55.7 × 121.5 mm |
| Weight |
Approx. 1.2 kg |
| Operating Temperature |
0–40°C |
| Storage Temperature |
-15–70°C |
| Humidity (Operating) |
5–80% RH (non-condensing) |
| Vibration Resistance |
49 m/s² (X, Y axes) |
| Backlash |
≤ 1 arc-min (gear reducer) |
| Certifications |
CE, UL, RoHS |
Frequently Asked Questions:
1. Q: Do you provide warranty for the goods?
A: Yes, we provide warranty for all the goods from us.We offer one year warranty for New items,6 months warranty for Used items.
2. Q: Could you provide technology support?
A: We're in this field many year. If there's any problem, please contact with us,we'll provide suggestion from our engineer to help you solve problem.
3. Q: Do you keep goods in stock or only trading?
A: We have large warehouse for goods and keeping lots of goods in warehouse, so we could delivery the items in short lead time.
Our advantage Products:
【Honeywell】Module DCS / PLC
【Emerson】DeltaV Module / Servo Motor
【ABB】Input Output Module
【AB】Module / Touch Screen
【Rosemount】Pressure and Temperature Transmitter
【Yokogawa】Pressure Transmitter
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive
(Modicon,SMC,SICK,NORGREN,Siemens etc.)
Your message must be between 20-3,000 characters!