IC693CMM321 GE FANUC SERIES 90-30 PLC Digital I/O Module FACTORY SEALED

IC693CMM321 GE FANUC SERIES 90-30 PLC Digital I/O Module  FACTORY SEALED
 
 
IC693CMM321 Product Description:
 
GE Fanuc Discrete input module for 90 - 30 series PLC offers 16 input points with one common power input terminal. It requires an AC power source for convenient operation. Module has LED indicators at the top to offer ON/OFF status of each point. Module has circuit wiring information on the surface towards the inside and circuit identification information on the outside surface. Module has a voltage rating of 120 VAC at 50/60 Hz, 0 - 132 VAC at 50/60 Hz, input current rating of 12 milli-Amps and a power rating of 90 milli-Amps at 5 VDC. It has a maximum ON response time of 30 milli-seconds and maximum OFF response time of 45 milli-seconds. Module is compatible with input devices such as pushbuttons, limit switches and electronic proximity switches. Input/output module provides the interface between the PLC and external input devices such as proximity sensors, push buttons, switches and BCD thumbwheels. It supports different voltage ranges, types, current capacity, isolation and response time to meet your application.
 
 
 
IC693CMM321 Product Details:
 
Input modules provide the interface between the PLC and external input devices such as proximity sensors, push buttons, switches and BCD thumbwheels. Output modules provide the interface between the PLC and external output devices such as contactors, interposing relays, BCD displays and indicator lamps. This module requires an AC power source, it cannot be used with a DC power source.

Product Summary:

• Type of Device: Ethernet Controller

• Description: Ethernet Interface Module

  
  

• Ethernet Interface: Directly attach your PLC to an Ethernet network, initiate transfer of data to the PLC from another device; communicate simultaneously to multiple devices with up to 16 server connections.

  
  

Product Description: GE Fanuc CMM 321 Ethernet interface TCP/IP module provides an interface that allows to attach the series 90-30 PLC to an Ethernet LAN via an external transceiver. It directly attach PLC to an ethernet network and initiates the transfer of data to the PLC from another device. Module communicates simultaneously to multiple devices with up to 16 server connections. It communicates from a host computer.

• Type of Device: Ethernet Controller
• Restart Button: The Restart button serves four functions: LED test, Restart, Restart and Reload, and Restart and Enter Maintenance Utility. The Restart button is inaccessible when the front cover of the Ethernet Interface is closed.
• Board Indicators: There are four LEDs on the Ethernet Interface: OK, LAN, SER, and STAT. These LEDs can be ON, OFF, BLINKING slow, or BLINKING fast. They indicate the state the Interface is in, traffic on the Transceiver port and Downloader port, and when an exception event has occurred.
• Product Details: CMM321 no longer supports the AAUI/AUI interface, diagnose and maintain your system using diagnostic and station management tools

 
Related Product Recommendation: