Yaskawa 1000rpm Industrial Servo Motor 0.45kW AC SERVO MOTOR SGMGV-05ADA21
Detailed Product Description
| Brand: |
Yaskawa |
Model: |
SGMGV-05ADA21 |
| Series: |
SGMGV |
Voltage: |
220V |
| Voltage Product Type: |
AC |
Power: |
0.45kW |
| Rated Torque: |
2.865N-m |
Current: |
3.8 |
| Highlight: |
ewing machine servo motor, ac servo motor |
Yaskawa 1000rpm Industrial Servo Motor 0.45kW AC SERVO MOTOR SGMGV-05ADA21
PRODUCT DETAILS
Current: 3.8A
Volatge: 200V
Power : 0.45KW
Rated Torque: 2.865N-m
Max speed: 1500rpm
Encoder: 17bit Absolute encoder
Load Inertia JL kg¡m2¢ 10−4: 0.026
Shaft: straight without key
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- |
Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- |
Emerson VE-,KJ- |
| Honeywell TC-,TK- |
GE Modules IC - |
| Fanuc motor A0- |
Yokogawa transmitter EJA- |
Contact person: Anna
E-mail: wisdomlongkeji@163.com
Cellphone: +0086-13534205279
SIMILAR PRODUCTS
| SGMGV-05ADA21 |
| SGMGV-09ADA61 |
| SGMGV-09ADC21 |
| SGMGV-09ADC61 |
| SGMGV-13ADA21 |
| SGMGV-13ADA61 |
| SGMGV-13ADA6C |
| SGMGV-1AADA61 |
| SGMGV-20ADA21 |
| SGMGV-20ADC61 |
| SGMGV-30ADA21 |
| SGMGV-30ADB6C |
| SGMGV-30ADC61 |
| SGMGV-44ADA21 |
| SGMGV-44ADA2C |
The main technical terms used in this manual are as follows:
1) Servo mechanism
2) Servo
Normally, servo is synonymous with servo mechanism. However, because “mechanism” is omitted, the meaning becomes somewhat ambiguous. Servo may refer to the entire servo mechanism but may also refer to an integral part of a servo mechanism such as a servomotor or a servo amplifier. This manual also follows this convention in the use of the term “servo”.
3) Servo control system
Servo control system is almost synonymous with servo mechanism but places the focus on system control. In this manual, the term “servo system” is also used as a synonym of servo control system.
Safety Precautions
- Never touch any rotating motor parts while the motor is running.Failure to observe this warning may result in injury.
- Before starting operation with a machine connected, make sure that an emergency stop can be
- applied at any time.Failure to observe this warning may result in injury or damage to the product.
- Never touch the inside of the SERVOPACKs.
- Failure to observe this warning may result in electric shock.
- Do not remove the cover of the power supply terminal block while the power is ON.Failure to observe this warning may result in electric shock.
- After the power is turned OFF or after a voltage resistance test, do not touch terminals while the
- CHARGE lamp is ON.Residual voltage may cause electric shock.
- Follow the procedures and instructions provided in this manual for trial operation.Failure to do so may result not only in faulty operation and damage to equipment, but also in personal injury.
- The multi-turn output range for the Σ-V Series absolute position detecting system is different from
- that of earlier systems (15-bit and 12-bit encoders). In particular, change the system to configure
- the Σ series infinite-length positioning system with the Σ-V Series.
- The multi-turn limit value need not be changed except for special applications.Changing it inappropriately or unintentionally can be dangerous.
- If the Multi-turn Limit Disagreement alarm occurs, check the setting of parameter Pn205 in the SER-VOPACK to be sure that it is correct.If Fn013 is executed when an incorrect value is set in Pn205, an incorrect value will be set in the encoder. The
- alarm will disappear even if an incorrect value is set, but incorrect positions will be detected, resulting in adangerous situation where the machine will move to unexpected positions.
- Do not remove the front cover, cables, connectors, or optional items from the upper front of the
- SERVOPACK while the power is ON.Failure to observe this warning may result in electric shock.
- Do not damage, press, exert excessive force on, or place heavy objects on the cables.
- Failure to observe this warning may result in electric shock, stopping operation of the product, or fire.
- Provide an appropriate stopping device on the machine side to ensure safety. The holding brake ona servomotor with a brake is not a stopping device for ensuring safety.
- Failure to observe this warning may result in injury.
- The person who designs a system using the safety function (Hard Wire Baseblock function) must
- have full knowledge of the related safety standards and full understanding of the instructions in thismanual.Failure to observe this warning may result in injury.
- Connect the ground terminal according to local electrical codes (100 Ω or less for a SERVOPACK
- with a 100 V, 200 V power supply, 10 Ω or less for a SERVOPACK with a 400 V power supply).
- Improper grounding may result in electric shock or fire.
- Installation, disassembly, or repair must be performed only by authorized personnel.
- Failure to observe this warning may result in electric shock or injury
MAIN SPECIFICATIONS
You can find the most detailed specifications and installation dimensions for this servo motor with driver from bellowing information: