Industrial Yaskawa Servo Drives Input 1 Phase SERVO PACK 750W SGDS-08A75A

Industrial Yaskawa Servo Drives Input 1 Phase SERVO PACK 750W SGDS-08A75A

HHIMPORTANTHH In this manual, when you see the caret (^) character, it indicates that you are to type the caret (^) character. The caret (^) character is not to be confused with pressing the Control (Ctrl) key on the keyboard. The caret (^) is a single printable ASCII character having the code 5E HEX or 94 decimal. Similarly, the tilde (~) is a single printable ASCII character having the code 7E HEX or 126 decimal. A few ZPL II instructions can be sent to the printer as either a Format Instruction or a Control Instruction. The action performed by the printer will be the same in either case. These instructions must be preceded by the appropriate prefix (i.e. a ^ or a ~) for the context in which they are used. Many ZPL II instructions have parameter strings associated with them. Changing the value of one or more of these parameters affects the outcome of the printed label

If the default value for an instruction parameter suits your application, you need not specify that parameter. However, parameters are “position-specific.” If you want to change just the third parameter, for example, you must indicate that it is the third parameter that you want to change. To do so, use a comma, the ZPL II delimiter character, to mark each parameter’s place (i.e. ^AA,,60). If you enter a parameter, all further parameters to the right are to be defaulted, no further commas are required.

Quick Details