GE Fanuc IC660EBD110 Electronic Assembly Block I/O 115 VAC 1500 V 5 A Product Lifecycle
More Information:
The IC660EBD110 is an electronic assembly that serves as a key component of the IC660BBD110, a 16-point discrete input module designed for 93-132 VAC operation. Originally manufactured by GE Fanuc Automation, this assembly is now under the ownership of Emerson Automation following a recent acquisition. As a critical functional unit, it incorporates the essential circuitry enabling discrete input capabilities—specifically housing voltage sensing circuits, a resistor-capacitor (RC) network, and isolation circuits for both input and output functionalities.
This electronic assembly is engineered to interface with a terminal base that provides termination points for input signals, with the IC660TBD110 being its dedicated compatible terminal base. Featuring 16 discrete input channels, the IC660EBD110 accepts input voltages ranging from 93 to 132 VAC at a frequency of 47-63 Hz, and boasts an isolation rating of 1500 V between its inputs and either ground or the serial bus.
A notable diagnostic feature of the IC660EBD110 is its ability to detect open or shorted input wires. Such faults are communicated to the central processing unit (CPU) and locally indicated via the Unit OK LED. Complementing this, the assembly is equipped with an I/O Enabled LED and 16 individual channel-specific LEDs, each corresponding to one of its input circuits to visually signal operational status.
The input channels typically achieve a processing time of 1 ms, though additional delays may occur based on configured filter settings. These filters can be adjusted in 10 ms increments, with available settings ranging from 10 to 100 ms. For environmental resilience, the assembly operates within a temperature range of 0 to 60 degrees Celsius, while its storage temperature tolerance extends from -40 to 100 degrees Celsius. It also accommodates relative humidity levels of 5-95% (non-condensing) and can withstand operating vibrations of 5-10 Hz with a displacement of 2 inches (or 5.088 mm). Importantly, the IC660EBD110 does not support Removal and Insertion Under Power (RIUP), so installation must be performed when the device is de-energized.
As part of GE Fanuc’s Genius I/O device series, the IC660EBD110 is a dedicated input assembly with 16 independent circuits. When all 16 inputs are powered and operating at full current, it has a maximum heat dissipation rating of 28 Watts. Its power requirements include a maximum device current of 80 milliamps and an additional maximum input circuit current of 200 milliamps.
Other key specifications include a terminal board rating of 5 Amps, a resistive input circuitry design that provides sufficient load to activate 2-wire proximity switches, and an input resistance of 11.6 kiloohms—delivering a preload current of 9.9 milliamps at 115 Volts. Each input circuit is paired with an individual LED indicator that signals whether the input voltage is at or above the configured threshold. The assembly utilizes 16 input references, where a bit value of 1 indicates that the corresponding input has reached or exceeded the set threshold voltage.
Physically, the GE Fanuc IC660EBD110 weighs approximately 1.8 kilograms and has dimensions of 8.83 x 3.50 x 3.94 inches.
We still can offer these Models:
| Manufacturer Name |
Part Number |
Description |
| EMERSON |
02-766050-10 |
REGULATOR BOARD |
| EMERSON |
02-766480-00 |
CLOCK DRIVER BD |
| EMERSON |
02-766431-00 |
BOOT STRAP BD |
| EMERSON |
02-766290-01 |
GATE DRIVE CARD |
| EMERSON |
02-766030-05 |
LVC/VCO BOARD |
| EMERSON |
02-766160-10 |
TEST PANEL |
| EMERSON |
02-766030-01 |
LVC/VCO BOARD |
| EMERSON |
02-766050-06 |
LVO/VCO BOARD |
| EMERSON |
02-766050-04 |
LVO/VCO BOARD |
| EMERSON |
02-766400-05 |
NORMALIZING BD |
| EMERSON |
02-766372-11 |
GATE DRIVE ASSY |
| EMERSON |
02-766050-16 |
LVO/VCO BOARD |
| EMERSON |
02-766400-06 |
NORMALIZING BD |
| EMERSON |
02-766395-00 |
DIGITAL BD 5100 |
| EMERSON |
02-766430-00 |
BOOT STRAP BD |
| EMERSON |
02-766030-11 |
|
| GATE DRIVE ASSY |
| EMERSON |
02-766372-12 |
GATE DRIVE ASSY |
| EMERSON |
02-766400-07 |
NORMALIZING BD |
| EMERSON |
02-766385-10 |
CUST. INTF. B.D. |
| EMERSON |
83-785374-00 |
BOOT STRAP ASSY |
| EMERSON |
02-783251-01 |
AS250-C |
| EMERSON |
2200-8360 |
SPECTRUM 2 DR. |
| EMERSON |
1060-7 |
ES225 CTRL. BD. |
| EMERSON |
2600-4005 |
DRIVE BD 2600RG |
| EMERSON |
1550-4210 |
DISPLAY BOARD |
| EMERSON |
2950-4207 |
BASE DRIVER BD. |
| EMERSON |
761-1 |
CLUTCH CONTROL |
| EMERSON |
2950-4028 |
PRISM DRIVER BD |
| EMERSON |
2450-4011 |
SIG. BD. #9011 |
| RED LION |
51-610-43 |
TACHOMETER |
| CUSTOM SERVO |
362377-01D |
COUNTER BOARD |
| INDUSTRIAL INDEXING |
MM-10 PLUS |
INDEX SYSTEM BD |
| ALLEN BRADLEY |
7300-UCR-2 |
INTERFACE MOD. |
| ALLEN BRADLEY |
1333-BAB/B |
AC DRIVE 3HP/460V |
| CURTIS INSTRUMENTS |
933-E12A |
BATTERY CONTROLLER |
| LUCIDYNE |
16-0100-01 |
FLASH-TUBE CARD |
| ALLEN BRADLEY |
1772-LE |
PROCESSOR MOD. |
| RELIANCE |
0-51893-1 |
FCCB Card |
| JEWELL |
369 |
'45' CONTROLLER |
Introduction of Wisdomlong Technology CO.,LTD
The company with domestic and international numerous well-known brands supplier to build have extremely good relations of cooperation, in Japan, South Korea, southeast Asia, Africa, Europe and the United States, and formed a stable and efficient supply network. The agent and the products are widely used in machinery, equipment manufacturing, electric power, metallurgy, petrochemical, automobile manufacturing industry, paper making, chemical industry, medicine and aerospace industries.
OTHER SUPERIOR PRODUCTS of Wisdomlong Technology CO.,LTD
| Yasakawa Motor, Driver SG- |
| Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- |
| Emerson VE-,KJ- |
| Honeywell TC-,TK- |
| GE Modules IC - |
| Yokogawa transmitter EJA- |
Our brands of Wisdomlong Technology CO.,LTD
Terms OF GE IC660EBD110
1. We ships worldwide and accepts T/T and Paypal.
2. All items are subject to availability and passing our QA testing and inspection.
3. Turnaround Time:
Standard order processing is 1-2 business days plus shipping method chosen.
Rush and off-hours service available for an additional fee.
4. Packaging and Handling:
Items are safely packaged in custom shipping cartons for protection.
Shipping OF GE IC660EBD110
1. We ship worldwid use UPS, FedEx, DHL, or Truck when needed.
2. Call to use a shipping service other than the ones listed.
3. International Customers are responsible for all Customs fees, VAT, and other fees applied by their respective countries.
FAQ OF GE IC660EBD110
1. Why choose us?
* Passionate, experienced and highly-educated R & D and sales team;
* Reasonable price and reliable products, skillful and careful assembly;
* Strict quality assurance and quick aftersales service;
* Lifetime technical support, can come with customized setting.
2. How about your product warranty?
* We offer one-year warranty upon delivery.
3. How about the aftersales support?
* We will offer on-time response for online enquiries from oversea users. Please feel free contact us by email, WhatsApp, WeChat and SKYPE.
Your message must be between 20-3,000 characters!