Technical specifications for IC693MDL240
Manufacturer: GE Fanuc Emerson
Product Type: Input Module
Product Line :Series 90-30
Part Number :IC693MDL240
Weight :1.00 lbs (0.45 kg)
Product Description: Discrete input module
No of Channels: Sixteen (16)
Input signal range: 0-132 VAC
Nominal Input voltage: 0-120 VAC
Volts: 120 V AC
Input Frequency: 47-63 Hz
Inputs :16
Input current :12mA per channel
Frequency :50/60 Hz
Current draw :90 mA
Input Current at a Rated Speed :12 mA
On State Voltage :74 VAC to 132 VAC
Isolation between field side and logic side: 1500 Volts RMS
Off state voltage :0 VAC - 20 VAC
AC Power :Yes
On state current: 6 mA
DC Power :No
Off state current: 2.2 mA
LED Indicators :16
On response time, typical :30 ms
Logic Reading: %I
On response time, maximum :45 ms
Product Lifecycle Status: Discontinued/Obsolete
The IC930MDL240 is a general-purpose discrete input module belonging to the Series 90-30 product family. Originally manufactured by GE Fanuc Automation, the product line is now under the ownership of Emerson Automation. This module occupies a single I/O slot on a CPU baseplate, I/O expansion baseplate, or Remote I/O baseplate.
Electronically, the IC930MDL240 operates within an input voltage range of 0–132 VAC at a frequency of 50/60 Hz, with a nominal voltage of 120 VAC and a nominal input current of 12 mA. It is designed to detect state changes in binary field devices such as switches, pushbuttons, auxiliary contacts, and similar components. The module is configured with a single group of input channels, boasting an isolation rating of 1500 VAC (rms) between the field side and the logic side. Its operational parameters include an On-state voltage range of 74–132 VAC with a corresponding current of 6 mA, and an Off-state voltage range of 0–20 VAC with a current of 2.2 mA. Each channel delivers a maximum On response time of 30 ms and a maximum Off response time of 45 ms, with a bus current consumption of 90 mA at 5 VDC.
There is no inherent limit to the number of IC930MDL240 modules that can be deployed in a system; the quantity is determined solely by the host controller’s I/O capacity and the number of supported expansion or Remote I/O baseplates. The programming software required for module configuration varies depending on the host controller’s firmware version and release, with compatible packages including LogicMaster 90-30, VersaPro, and Proficy Machine Edition.
The IC693MDL240 is another discrete input module engineered for the Series 90-30 GE PLC product line. Rated for 120 VAC operation, it features 16 input points sharing a single common power terminal. The 16 circuits are constructed with capacitor-resistor components, classifying them as reactive inputs. When current flows through an input point, the corresponding status recorded in the input table registers as Logic 1 (%I).
This module offers broad compatibility with a range of input devices, including limit switches, pushbuttons, and electronic proximity switches. Note that users must supply independent power to support connected field devices, as the IC693MDL240 operates exclusively on AC power and is not compatible with DC power supplies.
For intuitive status monitoring, the top of the module is equipped with two horizontal rows of green LED indicators—8 LEDs per row—each corresponding to an input point. The top row is labeled A1 to A8 for input points 1 to 8, while the bottom row is marked B1 to B8 for points 9 to 16, clearly displaying the On/Off status of each channel.
Structurally, the IC693MDL240 is fitted with a hinged door, with an insert positioned between the inner and outer door surfaces. When closed, the inner door surface provides detailed circuit wiring diagrams and circuit identification information for easy reference. As a key component of the GE Series 90-30 Programmable Logic Controller system, this module is compatible with all 5-slot and 10-slot I/O baseplates for flexible installation.
Your message must be between 20-3,000 characters!
