High Power Industrial Servo Motor AC Servomotors With Gear Head SGMPS 01ACA41

Industrial Servo Motor SGMPS-01ACA41 Yaskawa AC Servomotor  New in box
 
 
QUICK DETAILS

1.  Power : 100W 
2.  Voltage : 200V 
3.  Current : 0.86A

 
 
DESCRIPTION

•  AC Servo Motor 
• Servo Motor with Gear Head
• Servomotor SIGMA-3 

 
SEPCIFICATIONS

 
 
 
SERVOPACK Orientation
 
Install the SERVOPACK perpendicular to the wall so the front panel containing connectors faces outward.
 
 
Cooling
 
As shown in the figure above, allow sufficient space around each SERVOPACK for cooling by cooling fans or natural convection.
 
 
Side-by-side Installation
 
When installing SERVOPACKs side by side as shown in the figure above, allow at least 10 mm (0.39 in) between and at least 50 mm (1.97 in) above and below each SERVOPACK. Install cooling fans above the SERVOPACKs to avoid excessive temperature rise and to maintain even temperature inside the control panel.
 
 
Environmental Conditions in the Control Panel

• Ambient Temperature: 0 to 55°C (32 to 131° F)
• Humidity: 90% RH or less Vibration: 0.5 G (4.9 m/s2)
• Condensation and Freezing: None Ambient Temperature for Long-term
• Reliability: 45°C (113 °F) max.

 
Conduct voltage resistance tests under the following conditions.
 

•  Voltage:1500 Vrms AC for one minute
•  Braking current: 30 mA or more
•  Frequency: 50 or 60 Hz
•  For SGDS-†††72A SERVOPACKs: Between the ground terminals and the point where the terminals L1, L2, (L3), L1C, L2C, U, V, and W are connected.

 
 

 

 

 
 
                                          
 
SIMILAR  PRODUCTS

 
OTHER  SUPERIOR  PRODUCTS