Electric Servo Drive Yaskawa AC Servopack SGDM-04ADA 400W 2.8A 1PH 200V

 

 

 

 

 

 

SGDM-01AD

SGDM-01ADA

SGDM-01ADA/SGDH-01AE+SGMAH-01AAA21

SGDM-01ADA+SGMAH-01AAAG761

SGDM-01ADA-RY5

SGDM-01BDA

SGDM-02ADA

SGDM-02ADA/SGDH-02AE+SGMAH-02AAA21

SGDM-02ADA+SGMAH-02AAA2C

SGDM-02ADA+SGMPH-02AAA41

SGDM-02ADA+SGMPH-02A1A21

SGDM-02AD-R

SGDM-02BDA

SGDM-02BDA

SGDM-02BDA+SGMAH-02BBAB1

SGDM-04AC-AD2B

SGDM-04AC-SD1

SGDM-04AC-SD2A

SGDM-04ACSD2B

SGDM-04AC-SD2B

SGDM-04AC-SD2BM

SGDM-04AC-SD2M

SGDM-04AD

SGDM-04AD+SGMAH-04AAA41

SGDM-04ADA

SGDM-04ADA +SGMAH-04AAA21

SGDM-04ADA +SGMAH-04AAA41

SGDM-04ADA+SGMPH-04A1A21

SGDM-04ADA-RY1

SGDM-04ADAY360

SGDM-04AD-R

SGDM-04AD-RY1

SGDM-04ADY39

SGDM-05ADA

SGDM-05ADA+SGMAH-A5AAA21

SGDM-05ADA+SGMGH-05ACA6

SGDM-05ADAY118

SGDM-05ADAY61

SGDM-08AC-SD1

SGDM-08AC-SD2A

SGDM-08AC-SD2B

SGDM-08AC-SD2BM

SGDM-08AC-SD2M

SGDM-08ADA

SGDM-08ADA+SGMAH-08AAA21

SGDM-08ADA+SGMAH-08AAA41

SGDM-08ADA+SGMAH-08AAA41

SGDM-08AD-YR24

SGDM-10AC-SD1

SGDM-10ADA

SGDM-10ADG-P

 

 

The added or improved functions differ depending on the SERVOPACK model or software version number:

• SGDM-†††D

• SGDM-†††DA

• SGDM-†††A

(Software version No. 32 or later) Refer to the following table for the added or improved functions for each model. This table can also be used in reference to other SERVOPACK models.

 

 

Function Item Description Σ-II Series SERVOPACK SGDMReference †††D †††DA Section †††DA with Software Version No. 32 or later Applicable capacity range 30W to 3.0 KW Applicable Applicable Applicable - 30W to 15.0 kW N/A Applicable Applicable - Speed feed forward In the position control mode, the speed feed forward reference using an analog voltage can be input by the speed reference (VREF) input. N/A Applicable Applicable 9.4.3 Torque limit using an external torque limit and analog voltage reference To enable the torque limit function using analog voltage reference only when either /P-CL or / N-CL signal is ON. N/A Applicable Applicable 8.9.4 Input signal polarity reversal To reverse the “Enabled” logic polarity of sequence input signal N/A Applicable Applicable 7.3.2 Output signal polarity reversal To reverse the “Enabled” logic polarity of sequence output signal N/A Applicable Applicable 7.3.3 Multiturn limit setting To set the upper limit of multiturn data when using an absolute encoder. N/A Applicable Applicable 8.4.7 “Multiturn limit disagreement” alarm detection To detect the alarm A.CC when the multiturn limit value set in the encoder does not agree with that in the SERVOPACK. N/A Applicable Applicable 8.4.8 Average movement filter of position reference To filter the position reference pulse of constant frequency inside the SERVOPACK. Either acceleration/deceleration filter or average movement filter can be selected. N/A Applicable Applicable 8.6.4 Notch filter Filtering function to suppress vibration according to the machine’s vibration frequency. N/A Applicable Applicable 9.4.10 Second stage notch filter and changeable Q value A second stage notch filter is added. And the Q value (sharpness of notching) can be changed. N/A N/A Applicable 10.3.4