High Precision Redundant Power Supply Module VersaMax IC200MDl240 AC Input Module

Redundant Power Supply Module GE Fanuc VersaMax IC200MDl240J AC INPUT MODULE​

Product Description

These discrete input modules have positive logic or sourcing-type inputs; they receive current from AC input devices and return the current on the common. Input devices are connected between the input terminals and common terminals. Discrete Input Modules IC200MDL140, IC200MDL141, BXIOIA8120 and BXIOIA8240 provide one group of 8 discrete inputs. Discrete Input Modules IC200MDL240, IC200MDL241 (shown below), and BXIOIA16120 provide two groups of 8 discrete inputs.

Product Revision History

IC200MDL140F / BXIOIA8120F

IC200MDL141F / BXIOIA8240F

IC200MDL240G / BXIOIA16120G

IC200MDL241G

May 2009 Change of

manufacturing location.

IC200MDL140E / BXIOIA8120E

IC200MDL141E / BXIOIA8240E

IC200MDL240F / BXIOIA16120F

IC200MDL241F

Oct. 2008 Updated Power Supply

OK signal circuitry.

IC200MDL140D / BXIOIA8120D

IC200MDL141D / BXIOIA8240D

IC200MDL240E / BXIOIA16120E

IC200MDL241E

Apr. 2005 Plastic change on

locking mechanism

IC200MDL140C

IC200MDL141C

IC200MDL240D

IC200MDL241D

Apr. 2004 Changed to V0 plastic for module housing.

BXIOIA8120C

BXIOIA8240C

BXIOIA16120D

Jan. 2004 Changed to V0 plasticfor module housing.

ATEX approval for Group 2 Category 3

applications.

IC200MDL140B IC200MDL141B

IC200MDL240C IC200MDL241C

Jan. 2004 ATEX approval for

Group 2 Category 3

applications.

IC200MDL140A / BXIOIA8120A

IC200MDL141A / BXIOIA8240A

Mar.1999

Initial product release

IC200MDL240A / BXIOIA16120A

IC200MDL241A

Sep.1998Initial

Installation in Hazardous Locations

•EQUIPMENT LABELED WITH REFERENCE TO CLASS I, GROUPS A, B, C & D, DIV. 2 HAZARDOUS LOCATIONS IS SUITABLE FOR USE IN CLASS I, DIVISION 2, GROUPS A, B, C, D OR NON-HAZARDOUS LOCATIONS ONLY

• WARNING - EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS I, DIVISION 2;

• WARNING - EXPLOSION HAZARD - WHEN IN HAZARDOUS LOCATIONS, TURN OFF POWER BEFORE REPLACING OR WIRING MODULES; AND

• WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT UNLESS POWER HAS BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE NONHAZARDOUS.

Preinstallation Check

Carefully inspect all shipping containers for damage. If any equipment is damaged, notify the delivery service immediately. Save the damaged shipping container for inspection by the delivery service. After unpacking the equipment, record all serial numbers. Save the shipping containers and packing material in case it is necessary to transport or ship any part of the system.

Wiring Connections for Carriers with Two Rows of Terminals Row B connections shown below are for 16-point modules only

Wiring Connections for Carriers with Three Rows of Terminals Side B connections shown below are for 16-point modules only.

Operating Note

If hot insertion of a module is done improperly, the operation of other modules on the same backplane may be disrupted. See Installing a Module on a Carrier in the VersaMax Modules Manual, GFK-1504.

No derating is required for the 8-point modules in any orientation, or for the 16-point modules if they are mounted vertically (A, B) on the DIN rail.

For IC200MDL240 and BXIOIA16120 modules that are mounted horizontally (C, D) on the DIN rail, no derating is required at 120VAC. Deratings at 132VAC are shown below.