1500 W Power YASKAWA AC Servo Motor SGMPH-15AAA21 1500W 4.777 N.M

SGMGH-05ACA6C

SGMGH-05ACC21

SGMGH-09A2A21

SGMGH-09ACA21

SGMGH-09ACA2B

SGMGH-09ACA2C

SGMGH-09ACA61

SGMGH-09ACA6B

SGMGH-09ACA6C

SGMGH-09ACB61

SGMGH-09ACB6B

SGMGH-09PCA-AM14

SGMGH-12A2B2

SGMGH-12A2B21

SGMGH-13A2A-YR13

SGMGH-13A2A-YR23

SGMGH-13A2A-YR23A

SGMGH-13A2A-YR24

SGMGH-13ACA

SGMGH-13ACA21

SGMGH-13ACA61

SGMGH-13ACA6C

SGMGH-13DCA61

SGMGH-1AACA61

SGMGH-1EACA61

SGMGH-20A2B2C

SGMGH-20ABA6C

SGMGH-20ACA61

SGMGH-20ACA6B

SGMGH-20ACA6C

SGMGH-20ACB2C

SGMGH-20ACB61

SGMGH-20D2A21

SGMGH-30A2A-YR35

SGMGH-30A2A-YRA1

SGMGH-30A2B2C

SGMGH-30A2B6C

SGMGH-30ACA61

SGMGH-30ACB21

SGMGH-30ACB2C

SGMGH-30ACB61

SGMGH-30ACB6C

 

 

 

Specification of Encoder cable
Type: Control Cable 2 x 0,35mm² + 2 x 2 x 0,25mm²
Construction: 0,35mm² 0,25mm²
Conductor : bare copper-wire 0,35 mm², flexible bare copper-wire 0,25 mm², flexible
Insulation : Polyesterelastomer 12Y Polyesterelastomer 12Y
Colour : white + brown green/yellow, grey/pink
Twisting : two pairs
Cabeling : 2 cores + 2 pairs
Wrapping : insulationtape
Shield : braided tinned copper screen
Wrapping : Seperatingtape
Jacket : Polyurethan TMPU
Colour : black –dullPrinting
(wt) : ERNST + ENGRING VDE-REG-NR. 8589 2 x 0,35 + 2 x 2 x 0,25 90°C 300V
#### -HALOGENFREE- (####: coded manufacture date)
Overall diameter : (6,0 ± 0,3) mm
Electrical datas (at 20°C) (0,25 mm²) (0,50 mm²)
Conductor resistance : £ 82,0 W/km : £ 41,0 W/km
Insulation resistance : > 200 MWxkm
Screen attenuation up to 30MHz : 45 dB (approxiamate value)
up to 1 GHZ : 30 dB (approxiamate value)
(Test methode acc. IEC 96-1 Amend. 2 (1993) A.5.6 „Line injection method“)
Test voltage (C/C) : 2,0 kVeff
(C/S) : 1,0 kVeff
Operating voltage : 300V
Operating current (single cable) at ambient temperature
0,35mm² 0,25mm²
20°C : £ 4,5 A ; : £ 2,2 A
30°C : £ 3,8 A ; : £ 1,9 A
40°C : £ 3,2 A ; : £ 1,6 A
50°C : £ 2,5 A ; : £ 1,2 A
60°C : £ 1,9 A ; : £ 0,9 A
70°C : £ 1,2 A ; : £ 0,6 A
Temperature range (Transport & storage) : -70°C bis + 90°C
(Installation & handling) : -40°C bis + 90°C
(Operating) : -20°C bis + 80°C
Bending radius (Operating) : ³ 3 x cable-Æ
(several times) : ³ 7,5 x cable-Æ
(several times optimum): ³ 10 x cable-Æ
Bending strength (r= 10 x cable-Æ at 20°C) : ³ 5.000.000 cycles
reduced working life at higher operating temperatures.
Oil resistance : acc. VDE 0282 part 10
Hydrolyse resistance : acc. VDE 0282 part 10
Flame resistance : acc. VDE 0472 part 804 condition B
Approbation : VDE-expert evidence (VDE-REG-Nr.6589)
The jacket surface has low adhesion, this prevents a stickness by contact.
All materials are halogenfree.
Applicable for use in flexible chain cable holder systems.
Not for use outdoor or in earth
When used as control cable the relevant installation and/or applicance standards have to be regarded.

 

 

 

 

 

 

 

 

 

• The drawings presented in this manual are sometimes shown without covers or protective guards. Always replace the cover or protective guard as specified first, and then operate the products in accordance with the manual.

• The drawings presented in this manual are typical examples and may not match the product you received.

• This manual is subject to change due to product improvement, specification modification, and manual improvement. When this manual is revised, the manual code is updated and the new manual is published as a next edition.

• If the manual must be ordered due to loss or damage, inform your nearest Yaskawa representative or one of the offices listed on the back of this manual.

• Yaskawa will not take responsibility for the results of unauthorized modifications of this product. Yaskawa shall not be liable for any damages or troubles resulting from unauthorized modification.

 

 

 

 

OTHER SUPERIOR PRODUCTS