SGMDH-32A3A-YR14 Industrial Servo Motor 3200W 20.9A F InS High Flexible Conductor

 

 

 

 

 

 

1.8 Specification of Encoder cable
Type: Control Cable 2 x 0,35mm² + 2 x 2 x 0,25mm²
Construction: 0,35mm² 0,25mm²
Specification of the Motor cable 4 x 0,5mm²
Type: Motor supply cable 4 x 0,5mm²
Construction:
Conductor : bare copper-wire 0,5 mm², high flexible
Insulation : Polyesterelastomer 12Y
Colour : black with white numbers 1 – 3 + yellowgreen
Cabeling : 4 cores with fillers
Wrapping : insulationtape
Shield : braided tinned copper screen
Wrapping : Seperatingtape
Jacket : Polyurethan TMPU
Colour : black –dullPrinting
(wt) : ERNST + ENGRING VDE-REG-NR. 6508 4 x 0,5 90°C 300V
#### -HALOGENFREE- (####: coded manufacture date)
Overall diameter : (7,2 ± 0,3) mm
Electrical datas (at 20°C)
Conductor resistance : £ 41,0 W/km
Insulation resistance : > 200 MWxkm
Screen attenuation up to 30MHz : 45 dB (approxiamate value)
up to 1 GHZ : 30 dB (approxiamate value)
(Test methode acc. IEC 96-1 Amend. 2 (1993) A.5.6 „Line injection method“)
Test voltage (C/C) : 3,0 kVeff
(C/S) : 3,0 kVeff
Operating voltage : 600/1000V
Operating current (single cable) at ambient temperature
20°C : £ 10 A
30°C : £ 9,0 A
40°C : £ 7,0 A
50°C : £ 5,0 A
60°C : £ 3,0 A
70°C : £ 1,5 A
Temperature range (Transport & storage) : -70°C bis + 90°C
(Installation & handling) : -40°C bis + 90°C
(Operating) : -20°C bis + 80°C
Bending radius (Operating) : ³ 3 x cable-Æ
(several times) : ³ 7,5 x cable-Æ
(several times optimum): ³ 10 x cable-Æ
Bending strength (r= 10 x cable-Æ at 20°C) : ³ 5.000.000 cycles
reduced working life at higher operating temperatures.
Oil resistance : acc. VDE 0282 part 10
Hydrolyse resistance : acc. VDE 0282 part 10
Flame resistance : acc. VDE 0472 part 804 test condition B
Approbation : VDE-expert evidence
(VDE-REG-Nr.6508)
The jacket surface has low adhesion, this prevents a stickness by contact.
All materials are halogenfree.
Applicable for use in flexible chain cable holder systems.
Not for use outdoor or in earth
When used as control cable the relevant installation and/or applicance standards have to be regarded.

 

 

 

 

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission of Yaskawa. No patent liability is assumed with respect to the use of the information contained herein. Moreover, because Yaskawa is constantly striving to improve its high-quality products, the information contained in this manual is subject to change without notice. Every precaution has been taken in the preparation of this manual. Nevertheless, Yaskawa assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in this publication.

 

 

OTHER SUPERIOR PRODUCTS