Yaskawa AC Industrial Servo Motor SGMAH-A5ABA21 0.6A 300RMP Ins B 2 Years Warranty

 

 

 

 

 

 

Specification of the Motor cable with brake wires 6 x 0,5mm²
Type: Motor supply cable 6 x 0,5mm²
Construction:
Conductor : bare copper-wire 0,5 mm², high flexible
Insulation : Polyesterelastomer 12Y
Colour : black with white numbers 1 – 5 + yellowgreen
Cabeling : 6 cores with fillers
Wrapping : insulationtape
Shield : braided tinned copper screen
Wrapping : Seperatingtape
Jacket : Polyurethan TMPU
Colour : black –dullPrinting
(wt) : ERNST + ENGRING VDE-REG-NR. 6508 6 x 0,5 90°C 300V
#### -HALOGENFREE- (####: coded manufacture date)
Overall diameter : (9,2 ± 0,4) mm
Electrical datas (at 20°C)
Conductor resistance (0,5 mm²) : £ 41,0 W/km
Insulation resistance : > 200 MWxkm
Screen attenuation up to 30MHz : 45 dB (approxiamate value)
up to 1 GHZ : 30 dB (approxiamate value)
(Test methode acc. IEC 96-1 Amend. 2 (1993) A.5.6 „Line injection method“)
Test voltage (C/C) : 3,0 kVeff
(C/S) : 3,0 kVeff
Operating voltage : 600/1000V
Operating current (single cable) at ambient temperature
20°C : £ 10 A
30°C : £ 9,0 A
40°C : £ 7,0 A
50°C : £ 5,0 A
60°C : £ 3,0 A
70°C : £ 1,5 A
Temperature range (Transport & storage) : -70°C bis + 90°C
(Installation & handling) : -40°C bis + 90°C
(Operating) : -20°C bis + 80°C
Bending radius (Operating) : ³ 3 x cable-Æ
(several times) : ³ 7,5 x cable-Æ
(several times optimum): ³ 10 x cable-Æ
Bending strength (r= 10 x cable-Æ at 20°C) : ³ 5.000.000 cycles
reduced working life at higher operating temperatures.
Oil resistance : acc. VDE 0282 part 10
Hydrolyse resistance : acc. VDE 0282 part 10
Flame resistance : acc. VDE 0472 part 804 test condition B
Approbation : VDE-expert evidence
(VDE-REG-Nr.6508)
The jacket surface has low adhesion, this prevents a stickness by contact.
All materials are halogenfree.
Applicable for use in flexible chain cable holder systems.
Not for use outdoor or in earth
When used as control cable the relevant installation and/or applicance standards have to be regarded.