Servo Drives 50/60hz Yaskawa Electric Servopack 10 HP Drive 7.5KW SGDB-75VDY178

Servo Drives 50/60hz Yaskawa Electric Servopack 10 HP Drive 7.5KW SGDB-75VDY178
 
 

Specification 

Product number: SGDB-75VDY178

Description: SGDB-75VDY178 is an Drives-AC Servo

Drive Type: SGDB AC Servo Drive

Rated Output: 7.5kW

Supply Voltage: 200V

Applicable motor series: SGMG

Option Specification: None

Modification: None

 
The SGDB Sigma Series Servopacks are Amplifiers for the Sigma Series of AC Servos. Designed for applications requiring multi-drives, the SGDB can be used for speed control, torque control, and position control. A digital operator can be used to set parameters for a Servopack.
 
Features
230VAC Three-Phase Input Power
Accepts an Analog Voltage Speed Reference
Three Internally Set Speeds
Compact Design
Easy Operation

Estimated Shipping Size
Dimensions: 3" x 6" x 7" (8 cm x 15 cm x 18 cm)
Weight: 1 lbs 9 oz (0.71 kg)

Application motor:

SGMAH- 02AAA41

SGMAH- 02A1A41

SGMAH- 02AAA4C

SGMAH- 02A1A4C

We are specialized in providing technical solutions and consultancy for these products.

Service, repair, replace built, rebuild, regrind, recondition, refurbish, re-manufacture, retrofit and overhaul all servo drive and motor.

Most of our standard Items are available Ex-Stock

We can provide third party services all over world.

For any other related information feel free to contact us.
 
 
 
 

The vibration severity is the quadratic mean (rms) value of the vibration velocity (in a frequency range of 10 to 1000 Hz). The vibration velocity is measured with electrical measuring equipment
in accordance with DIN 45 666.
The values indicated refer only to the motor. The system vibration characteristics due to installation can cause these values to increase.

Rotational speeds of 1800rpm and 3600rpm and their associated limits are specified in accordance with IEC 60034-14. Rotational speeds of 4500 rpm and 6000 rpm and their associated values have been specified by the motor manufacturer.

The vibrational quality characteristics of motors with attached belt pulleys are determined primarily by the balance of the attachment part, as well as the balance quality of the motor.
If the motor and the attachment part are balanced separately prior to assembly, the balancing process of the belt pulley must be adapted to the balancing type of the motor. The following balancing types exist for motors 1PH4, 1PH7, and 1PL6:
• Half-key balancing
• Full-key balancing
• Keyless shaft end

OTHER SUPERIOR PRODUCTS