Industrial Servo Motor 100V 2.1A Yaskawa Sigma 2 Servo Motor SGMAH-02A1F61

Industrial Servo Motor 100V 2.1A Yaskawa Sigma 2 Servo Motor SGMAH-02A1F61

QUICK DETAILS

· YASKAWA ELECTRIC

· SGMAH 01A1A2B

· SGMAH 01A1A2B

· SERVO MOTOR

· AC SERVO MOTOR

· 400W

· 0.318 N.m

· 0.91A

· Ins B

· 3000RPM

· 200V

· AVAILABLE

· REBUILT SURPLUS

· NEW SURPLUS

· REPAIR YOURS

· 24-48 HOUR RUSH REPAIR

· 2 - 15 DAY REPAIR

· 2 YEAR RADWELL WARRANTY

OTHER SUPERIOR PRODUCTS

SIMILAR PRODUCTS

Important Notes:
1- It is not a good idea to connect a motor of any kind directly to the Arduino because it usually requires more power than the board can provide.

2- In our example, the servo is being used to demonstrate code and is not encountering any resistance. Note that you should use a standard or small size if you are uncertain, check the servo's no load current rating (it should usually be under 150mA).

3-You may need an external source of 5 or 6 volts when connecting multiple servos. Four AA cells work well if you want to use battery power. Remember that you must connect the ground of the external power source to Arduino ground.

●Encoder
The encoder is a sensor that notifies the driver of the motor speed and
position.
The encoders (position detector) used for the servo motor are structurally
classified as "incremental encoders" and "absolute encoders."
Oriental Motor uses a 20-bit absolute encoder for our servo motors NX series
for low vibration at low speed range.