Industrial Servo Motor Yaskawa AC SERVO MOTOR 2.63NM 550W 4AMP 2000RPM SGMDH-06A2A-YR26

 

 

 

 

 

Stepper Motor Advantagesand Disadvantages
Advantages
1. The rotation angle of the motor is proportional to the input pulse.
2. The motor has full torque at standstill (if the windings are energized)
3. Precise positioning and repeatability of movement since good stepper motors have an accuracy of
3 – 5% of a step and this error is non cumulative from one step to the next.
4. Excellent response to starting/ stopping/reversing.
5. Very reliable since there are no contact brushes in the motor. Therefore the life of the motor is simply dependant on the life of the bearing.
6. The motors response to digital input pulses provides open-loop control, making the motor simpler
and less costly to control.
7. It is possible to achieve very low speed synchronous rotation with a load that is directly coupled to the
shaft.
8. A wide range of rotational speeds can be realized as the speed is proportional to the frequency of the
input pulses.

 

 

 

 

NOTE
 
Avoid getting thinner on other parts of the Servomotor when cleaning the shaft.
 
 
Storage:
 
 
When the Servomotor is to be stored with the power cable disconnected, store it in the following temperature range:
 
Between −20°C and 60°C
 
 
Installation sites:
 
The Servomotor SGM and SGMP types are designed for indoor use.
 
Install Servomotor in an environment which meets the following conditions:

1. Free from corrosive and explosive gases
2. Well-ventilated and free from dust and moisture
3. Ambient temperature of 0 to 40°C
4. Relative humidity of 20% to 80% (non-condensing)
5. Inspection and cleaning can be performed easily

If the Servomotor is used in a location subject to water or oil mist, install a shield cover over the Servomotor.