Industrial Servo Motor Yaskawa Servo Motor 1500rpm 2900w 18.6nm SGMGH-30A2A-YR11

Industrial Servo Motor Yaskawa Servo Motor 1500rpm 2900w 18.6nm SGMGH-30A2A-YR11

SPECIFITIONS

Manufacturer: Yaskawa

Product number: SGMGH-30A2A-YR11

Description: SGMGH-30A2A-YR11 is an Motors-AC Servo manufactured by Yaskawa

Servomotor Type: SGMDH

Rated Output: 2900W (0.13HP)

Power Supply: 200V Standard

Encoder Specifications: 12-bit (1024 P/R) Absolute Encoder

Revision Level: Standard or CE Specification

Shaft Specifications: Straight with keyway

Options: 90VDC Brake

OTHER SUPERIOR PRODUCTS

SIMILAR PRODUCTS

Installing the Servomotor

Servomotor SGM and SGMP types can be installed either horizontally or vertically. However, if the Servomotor is installed incorrectly or in an inappropriate location, the service life will be shortened or unexpected problems will occur. To prevent this, always observe the installation instructions described below.

Before installation:

Anticorrosive paint is coated on the edge of the motor shaft. Clean off the anticorrosive paint thoroughly using a cloth moistened with thinner.

Use a fast-response type ground-fault interrupter.

For a ground-fault interrupter, always use a fastresponse type or one designed for PWM inverters. Do not use a time-delay type.

Do not perform continuous operation under overhanging load.

Continuous operation cannot be performed by rotating the motor from the load and applying regenerative braking. Regenerative braking by the Servopack can be applied only for a short period, such as the motor deceleration time.

The Servomotor cannot be operated by turning the power ON and OFF.

Frequently turning the power ON and OFF causes the internal circuit elements to deteriorate. Always start or stop the servomotor by using reference pulses.