Industrial Servo Drive askawa 5.0KW 5.0KW SERVOPACK SGDM-50ADA-RY3 Made in Japan
Detailed Product Description
| Brand: |
Yasakawa |
Model: |
SGDM-50ADA-RY3 |
| Palce Of Origin: |
Japan |
Type: |
Servopack |
| Power: |
5000W |
Nput Volatge: |
200-230v |
| Input Frequency: |
50/60hz |
Input PH: |
1 |
| Highlight: |
ac servo pack, ac servo drive |
Industrial Servo Drive askawa 5.0KW 5.0KW SERVOPACK SGDM-50ADA-RY3 Made in Japan
Before You Begin
Remove all packing material, wedges, and braces from within and around the components. After unpacking, check the item nameplate catalog number against the purchase order. Parts List The Kinetix 5500 servo drives ship with the following: • Wiring plug connector set for mains input power (IPD), 24V control input power (CP), digital inputs (IOD), motor power (MP), motor brake (BC), and safe torque-off (STO) • 2198-KITCON-DSL connector kit for motor feedback connections • Wiring plug connector for shunt power (RC) connections installed on the drive • These installation instructions, publication 2198-IN001
Quick Details
Input Voltage:200-230V
Input Current: 28A
Input Frequency:50/60HZ
Input PH : 3
Series : Sigma 2 (Σ-II Series)
Output Power : 5.0KW
Output Voltage: 0-230V
Output Current: 32.8A
Output Frequency:0-300Hz
Output PH :3
Temperture: 0-55℃
Place of Origin:Japan
Efficiency:IE 1
Similar Products
| SGDM-15AC-SD1 |
| SGDM-15ADA |
| SGDM-15ADA.SGDH-15AE |
| SGDM-1AADA |
| SGDM-1EADA |
| SGDM-20AC-SD1 |
| SGDM-20AC-SD2B |
| SGDM-20AC-SD2BM |
| SGDM-20ADA |
| SGDM-20ADA-V |
| SGDM-20ADA-Y47 |
| SGDM-30AC-SD1 |
| SGDM-30ADA |
| SGDM-30ADA-V |
| SGDM-50AC-SD1 |
| SGDM-50ADA |
| SGDM-50ADAY60 |
| SGDM-60AC-SD1 |
| SGDM-60ADA |
| SGDM-75AC-SD1 |
| SGDM-75ADA |
| SGDM-A3ADA |
| SGDM-A3ADA+SGMAH-A3AAAJ36C |
| SGDM-A3ADA+SGMAH-A3ABA21 J |
| SGDM-A3ADA-R |
| SGDM-A3BD |
| SGDM-A3BDA |
| SGDM-A3BDAY278 |
| SGDM-A5ADA |
| SGDM-A5ADA+SGMAH-A5AAA21 |
| SGDM-A5ADA-R |
| SGDM-A5ADA-TE3B |
| SGDM-A5AD-RY90+SGMAH-A5AAA21 |
| SGDM-A5ADY90 |
| SGDM-A5BDA |
| SGDM-A5BDA+SGMAH-A3BAA21 |
| SGDM-A5BDA+SGMAH-A5BAA21 |
Removing the Grounding Screws in Ungrounded Power Configurations Removing the grounding screw is necessary only when using ungrounded or corner-grounded power configurations. Removing the screws involves gaining access, opening the side door, and removing the screws. Removing the grounding screws in multi-axis configurations is best done when the drive is removed from the panel and placed on its side on a solid surface equipped as a grounded static-safe workstation. Remove the Grounding Screws IMPORTANT If you have grounded wye power distribution, you do not need to remove the screws. Go to Install the Kinetix 5500 Servo Drive on page 5. Removing the ground screws can affect EMC performance. ATTENTION: By removing the grounding screw for ungrounded power configurations, you no longer maintain line-to-neutral voltage protection. ATTENTION: This drive contains electrostatic discharge (ESD) sensitive parts and assemblies. You are required to follow static-control precautions when you install, test, service, or repair this assembly. If you do not follow ESD control procedures, components can be damaged. If you are not familiar with static control procedures, refer to Guarding Against Electrostatic Damage, publication 8000-4.5.2, or any other applicable ESD awareness handbook.
OTHER SUPERIOR PRODUCTS
Yasakawa Motor, Driver SG- Mitsubishi Motor HC-,HA-
Westinghouse Modules 1C-,5X- Emerson VE-,KJ-
Honeywell TC-,TK- Fanuc motor A0-
Rosemount transmitter 3051- Yokogawa transmitter EJA-