Yaskawa Industrial New Electric AC Servo Motor 1800W SGMG Series SGMG-20A6AT-VO1
Specifications
Current: 16.7A
Volatge: 200V
Power :1800W
Max speed: 1500rpm
Encoder: 17bit Absolute encoder
Load Inertia JL kg¡m2¢ 10−4: 0.026
Shaft: straight without key
OTHER SUPERIOR PRODUCTS
Yasakawa Motor, Driver SG- Mitsubishi Motor HC-,HA-
Westinghouse Modules 1C-,5X- Emerson VE-,KJ-
Honeywell TC-,TK- Fanuc motor A0-
Rosemount transmitter 3051- Yokogawa transmitter EJA-
Contact person: Anna
E-mail: wisdomlongkeji@163.com
Cellphone: +0086-13534205279
Similar Products
| SGMG-20A2AAB |
| SGMG-20A2AB |
| SGMG-20A2ABC |
| SGMG-20A2ABS |
| SGMG-20A2BB |
| SGMG-20A2BBB |
| SGMG-20ASA |
| SGMG-20AWA |
| SGMG-30A2A |
| SGMG-30A2AAB |
| SGMG-30A2AB |
| SGMG-30A2ABC |
| SGMG-30A2ABS |
| SGMG-30AWA |
| SGMG-30V2AB |
| SGMG-40V2AB |
| SGMG-44A2AAB |
| SGMG-44A2AB |
| SGMG-44A2ABC |
| SGMG-44ASAAB |
| SGMG-44V2AB |
| SGMG-55A2A |
| SGMG-55A2AAB |
| SGMG-55A2AB |
| SGMG-55A2ABC |
| SGMG-60A2BBB |
| SGMG-60A2BBC |
| SGMG-75A2AAB |
| SGMG-75A2AB |
| SGMG-75A2ABC |
Highly Compressible Drilling Fluids Highly compressible fluids are generally associated with underbalanced drilling. They have densities ranging from 6.95 ppg, with back pressure, down to 0 ppg. They are comprised of gasses, mists, foams, and aerated liquids with high gas to liquid ratios. Conventional drilling motors are not designed for use in compressible fluids and have problems including shortened life, stalling, and runaway. INTEQís ADM incorporates a special design that employs much larger chamber volumes to give lower output rotational speeds for a given flow rate and lower pressure drops than conventional motors. This provides the advantages of improved motor efficiency, fewer stalls versus conventional motors, and reduced chances of overspeed. They can be used with the entire range of compressible fluids and liquid drilling fluids as well.
The PERFFLOWÆ fluid system is one of Baker Hughes INTEQís Drilling Fluidsí drill-in fluids. The system uses polymers for viscosity and fluid loss control and incorporates sized calcium carbonate for bridging off the pore throats of the production formation. The fluid loss additives and bridging agent are designed to minimize fluid invasion and form an easily removable filter cake. PERFFLOWÆ systems can be made up with fresh water or a brine depending on fluid density requirements.
Your message must be between 20-3,000 characters!