|
|
|
Product Details:
Payment & Shipping Terms:
|
| Manufacturer: | Rexroth | Item: | R902462921 A A10F M 14 52R-VCC66N002 |
|---|---|---|---|
| Product Type Designation: | Axial Plunger Motor | Series: | A10fm Series 52 |
| Condition: | 100% New | Shipping Weight: | Checking |
| Payment Terms: | Western Union/Paypal/TT | Shipping Terms: | UPS/DHL/FEDEX/TNT |
| Bar Nominal Pressure: | 350 | ||
| High Light: | Rexroth Axial Plunger Motor,A10fm 52 Axial Plunger Motor,R902462921 A A10F M 14 52R-VCC66N002 |
||
Feature:
A proven A10 gyro technique
Identified for high-speed operation
Long service life
High power density
Low Work Noise
Optional integrated anti- cavitation valve, such as fan drive
Optional High Speed Sensor
Design of inclined disc
Medium pressure motors for standard applications
Specification 18 63
bar nominal pressure 280
Maximum pressure bar 350
Open and closed loops
Installation instructions:
Overview
During commissioning and operation, the axial plunger unit must be filled with hydraulic oil and discharge air. After a relatively long period of deactivation, the above precautions must also be observed, as the axial plunger unit may drain the hydraulic oil back into the tank through the hydraulic pipeline.
Shell oil relief inside the shell must be discharged to the tank through the highest available drain (L,L1) port.
If several plunger units share a drain line, ensure that the respective shell pressure is not exceeded. The size of the shared drain line must be set to ensure that the maximum allowable shell pressure of all connecting units is not exceeded in any use, especially during cold start. If this can not be guaranteed, separate tank lines must be laid as required.
In order to achieve a good noise value, all connecting lines should be decoupled with elastic elements and avoid installation above the tank.
Under all operating conditions, the drain line must enter the tank below the lowest oil level.
Safety Warraning:
During and shortly after operation, the axial plunger unit is at risk of burns. Appropriate safety measures should be taken (e.g. wearing protective clothing).
Specifition:
| High voltage motor suitable for limited space |
| Specification 22,500 |
| 400 bar nominal pressure |
| Maximum pressure up to bar 450 |
| Open and closed loops |
Flushing valve and filling valve:
The flushing valve and the oil filling valve discharge the heat in the closed loop and ensure that the oil filling pressure is minimum.
The hydraulic oil on the corresponding low pressure side flows into the motor housing. Then flow into the tank with the leaked oil. The discharged hydraulic oil must be replaced by the coolant pressure oil of the filling pump.
The valve is integrated in the oil port plate.
Similar Models:
Send Inquiry---Peovide Quotation---Confirmed---Make PI---Arrange Payment---Prepare order and goods after received the payment.
Contact Person: Mayne
Tel: +86 14787509512