FR-A840-00083-E2 Mitsubishi A840 IP20 2.2kW/3.7kW 400V AC Inverter Drive
Description of FR-A840-00083-E2
Mitsubishi FR-A800 E Series AC Inverter for 2.2kW (3HP) 400V 3 Ph motor to 6A at high overload, or 3.7kW (5HP) to 8.3A when Fan/Pump rated. Operates in VxF, Sensorless Vector or Full Closed-loop Flux Vector (when the optional Encoder Feedback card is fitted). Simple set-up and ready to run from its default settings.
Size 1 - 150mm Wide x 140mm Deep x 260mm High. IP20 Weight: 3.3kg
Overload - 150% x 60 seconds, 200% x 3 seconds (High Overload)
Overload - 110% x 60 seconds, 120% x 3 seconds (Fan/Pump Rated)
Speed Control Range - 0.5Hz to 400Hz.
Braking – None (option via external brake unit).
Terminal CA Equipped Model.
3 Analogue Inputs, 12 Digital Inputs, 2 Analogue Outputs, 5 Digital Outputs, 2 Relay Contact Sets, integrated PLC functions and RS485 Modbus-RTU,
Includes Built-in Ethernet Board (FR-A8ETH).
Control Logic - Source Version.
Circuit Board Coated (Conforming to IEC60721-3-3 3C2/3S2).
'Safe Torque Off' (STO) function to SIL 2.
INVERTER of FR-A840-00083-E2
| SERIES |
FR-A SERIES |
| TYPE |
FR-A800-E INVERTER |
| MINIMUM RATED VOLTAGE (V) |
380 |
| MIN. PERMISSIBLE VOLTAGE (V) |
323 |
| MAXIMUM RATED VOLTAGE (V) |
500 |
| MAX. PERMISSIBLE VOLTAGE (V) |
550 |
| CURRENT TYPE |
AC |
| PHASES |
3 |
| RATED OUTPUT CURRENT SLD (A) |
8,3 |
| RATED OUTPUT CURRENT LD (A) |
7,6 |
| RATED OUTPUT CURRENT ND (A) |
6 |
| RATED OUTPUT CURRENT HD (A) |
4 |
| RATED MOTOR CAPACITY SLD (KW) |
3,7 |
| RATED MOTOR CAPACITY LD (KW) |
3,7 |
| RATED MOTOR CAPACITY ND (KW) |
2,2 |
| RATED MOTOR CAPACITY HD (KW) |
1,5 |
| CONTROL METHOD |
VECTOR CONTROL (WITH FR-A8AP)
V/F CONTROL
SOFT-PWM/HIGH FREQUENCY PWM
REAL SENSORLESS VECTOR CONTROL
PM SENSORLESS VECTOR CONTROL
MAGNETIC FLUX VECTOR CONTROL |
| MOTOR TYPE |
INDUCTION MOTOR, PM MOTOR |
| BRAKE CHOPPER ED (%) |
100 |
| INTEGRATED EMC FILTER |
YES |
| SAFE TORQUE OFF (STO) |
YES |
| REGENERATIVE (4Q) |
NO |
| INTEGRATED DC CHOKE |
NO |
| DISPLAY |
FR-DU08 |
Note: The symbols ABC... show the recommended sequence to select the servo motor and cables Servo motor
A Select motor from families SGMAH, SGMPH, SGMGH, SGMUH, SGMSH, SGMBH using motor tables in next pages.
Servo drive
Note: Choosing Sigma-II drive or XtraDrive affects to the encoder cable needed. B Refer to Sigma-II servo drive or XtraDrive chapter for detailed drive specifications and selection of drive accessories.
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- |
Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- |
Emerson VE-,KJ- |
| Honeywell TC-,TK- |
GE Modules IC - |
| Fanuc motor A0- |
Yokogawa transmitter EJA- |
Our advantage Products:
【Honeywell】Module DCS / PLC
【Emerson】DeltaV Module / Servo Motor
【ABB】Input Output Module
【AB】Module / Touch Screen
【Rosemount】Pressure and Temperature Transmitter
【Yokogawa】Pressure Transmitter
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive
(Modicon,SMC,SICK,NORGREN,Siemens etc.)
Your message must be between 20-3,000 characters!