Technical specifications for IC697CMM721
Product Line :Series 90-30
Part Number :IC693MDR390
Weight :0.69 lbs (0.31 kg)
Input Rated Voltage :24 Volts DC
Product Description :Combination Discrete input / output module
Input Voltage range :–30 to +32 volts DC
No of input channels :Eight (8) 24 VDC inputs
Inputs per Module: 8
No of output channels: Eight (8) Normally Open (N.O.) contact outputs
Output Rated Voltage:24 VDC, 120/240 VAC
Nominal input voltage: 24 VDC
Output Operating Voltage :5 to 30 Volts DC, 5 to 250 Volts AC, 50/60 Hz
Input current :7.5 mA at rated voltage
Outputs per Module :8
Output operating voltage range :5-30 VDC; 5-250 VAC
Maximum Load per output :2 Amps
Output nominal voltage: 24 VDC; 120/240 VAC
Maximum Load per common :4 Amps
Maximum load :2 A, maximum
Product Lifecycle Status: Discontinued/Obsolete
Input On and Off response time :7 ms
Output On and Off response time: 15 ms
Backplane current draw :80 mA when all IO are active; 70 mA with all output energized
The IC697CMM721 is an integrated discrete input/output (I/O) module designed for the Series 90-30 Programmable Logic Controller (PLC) platform. It combines 8 discrete input channels and 8 discrete output channels in a single unit, offering a compact and versatile solution for industrial control applications.
The input channels are engineered to accommodate a voltage range of -30 to +30 VDC, with a nominal operating voltage of 24 VDC and a typical input current of 7.5 mA at this rated voltage. Their operational parameters include an On-state voltage range of 15–32 VDC (with 4 mA current) and an Off-state voltage range of 0–5 VDC (with 1.5 mA current), with a typical response time of 7 ms for both On and Off signal transitions.
For the output side, the module features 8 normally open (N.O.) relay contacts, compatible with voltage ranges of 5–30 VDC and 5–250 VAC (at 50/60 Hz frequency). Each output contact supports a maximum load current of 2 Amperes, while the maximum current per common terminal is 4 Amperes. The output channels have a typical response time of 15 ms for both On and Off transitions, with a maximum response time of 15 ms for both states.
As a single-slot module, the IC693MDR390 can be installed in any I/O slot of a Series 90-30 baseplate, compatible with all Central Processing Unit (CPU) modules—including embedded and modular types. It is suitable for installation in local I/O baseplates (where the CPU is mounted), as well as expansion or remote I/O baseplates. Its backplane current consumption is 80 mA when all I/O channels are active, and 70 mA when all outputs are energized.
Classified as a solid-state I/O module, the IC693MDR390 is tailored specifically for the GE Fanuc Series 90-30 PLC product line. It acts as a user-friendly 8-circuit trigger device, accepting discrete input signals from devices such as manual switches, pushbuttons, limit switches, and photocells. Each input channel corresponds to a relay output circuit, enabling control of user-defined loads like motor starters, alarm indicators, and solenoid valves.
The module requires a 24 VDC rated power source for operation and can function reliably within a voltage range of -30 to +32 VDC. It provides a cost-effective solution for controlling up to 8 independent relay circuits via DC signals. The output channels are divided into two groups of 4, allowing each group to be powered by different sources with varying voltage ranges if required.
In terms of electrical isolation, the IC693MDR390 offers a high isolation voltage of 1500 Volts RMS between inputs and outputs, with 500 Volts RMS isolation between the output groups. Each circuit is equipped with a status LED, which illuminates to indicate whether the relay is in the energized (closed) state or the normal (open) state, enabling intuitive operational monitoring.
Your message must be between 20-3,000 characters!
