200V 400W 2.6A 3000RPM Industrial Servo Motor Yaskawa SGMPH-04A1A-YR61

Industrial Servo Motor Yaskawa SGMPH-08A1A-YR11 200V 400W 2.6A 3000RPM

QUICK DETAILS

1. Power : 400W
2. Voltage : 200V
3. Current : 2.6A

DESCRIPTION

• Yaskawa Motor
• Servo Motor
• AC Servomotor

SEPCIFICATIONS

Service Commands

Two types of additional operations are available, Direct Commands and Memory Operations. Different settings are used to distinguish if a direct command is being issued or not, and to distinguish the type of memory being accessed. The setting for the read or write functions setting will apply to all Memory Operations as well as some Direct Commands.

For more information on operating methods, refer to the MEI SynqNet Controller manuals.

(1) Memory Operations Motor capacity, motor models, encoder resolution, and alarm history data can be read.

(2) Direct Commands The following direct commands are supported by SGDS SynqNet.

Digital Operator Operation

The digital operator can be used to operate the servomotor and to perform other functions such as the multi-turn reset.

Operate with the Digital Operator

Use the digital operator to operate the servomotor with utility function Fn002 (Jog Mode Operation). The factory setting for jog operation is 500 min-1. Check to see if the servomotor runs normally. The operating procedure is given below.

The motor can be operated using only the digital operator. This makes it possible to check the servomotor rotation direction and set the speed during machine setup and trial operation without connecting the host controller.

* When operating the servomotor with the digital operator, a parameter can be used to change the servomotor speed, as described below. Parameter: Pn304, Unit: min-1, Standard setting: 500 min-1

SIMILAR PRODUCTS

OTHER SUPERIOR PRODUCTS